Ideal for increasing storage capacity when used along with water heaters and domestic hot water heating boilers

Thick foam insulation reduces standby heat loss and saves energy

Alkaline borosilicate composition is permanently fused to steel by firing at a temperature of 1600 Deg F and will provide years of corrosion protection and dependable use at water storage temperatures up to 180 Deg F

All tanks furnished with threaded openings for thermometer, relief valve, 2 Inch recirculation lines, tankstat and drain valve

Sized to fit space restrictive installations, all 80 and 120-gallon models fit through 30 Inch doorways

Sandblaster is the Original Money Saving Self-Cleaning Water Heater

It Provides Outstanding Performance and Installation Flexibility for New Construction and Replacement Applications

Significantly Reduces Sediment Buildup Inside the Tank

Maintains Rated Thermal Efficiency, Reduces Water Heating Costs

Maximizes Tank Life

Automatic Motorized Flue Damper Helps Minimize Standby Heat Loss

Low-Profile Draft Diverter Helps for Installation in Tight Spaces

Hot and Cold Water Connections can be Made through Front, Top or Rear of Unit

Hydro Cannon Operates When Cold Water is Connected through Front

Eliminates Standing Pilot, Saves Energy

Anode Rods Provides Outstanding Protection Against Corrosion

Multiple Anode Rods with Stainless Steel Cores for Longer Life

Manual Reset Gas Shut-Off Device Prevents Excessive Water Temperature

Gas Pressure Regulator and Pilot Filter

Allows Easy Access to Tank Interior for Cleaning

Pipe Nipples and Caps to Plug Unused Water Connections

AHRI Certified

Lead-Free

Modulating Ultra Force High Efficiency Power Vent is an industry leader in high efficiency commercial water heating

The current modulating models adjust firing rate to the specific demand further increasing efficiency and money savings

Exclusive State designed color touch display control system

Provides detailed water heater status information

Built-in diagnostics

Intelligent Demand Response (IDR) feature senses large water draws and automatically adjusts the differential set point

This feature increases the hot water available when it is needed the most

SUBMERGED COMBUSTION CHAMBER, with HELICAL HEAT EXCHANGER COIL-Positioned in center of tank, surrounded by water to virtually eliminate radiant heat loss from chamber

Spiral heat exchanger keeps hot burner gases swirling, uses centrifugal force to maximize efficiency of heat transfer to water in tank

Spiral heat exchanger reduces lime scale from forming on water-side surfaces, which maintains energy efficiency over time

POWERED ANODES Standard ON ALL MODELS-Provides long-lasting tank protection in varying water conditions

Powered anodes are non-sacrificial

Automatically adjusts output needed to properly protect the tank

MECHANICAL VENTING VERSATILITY-Conventional power venting or direct venting

Vents vertically or through a sidewall

Front located exhaust and condensate connections allow for easy install and access

Energy Star® Rated

Lead-Free

The Force 90+ is a light-duty, power direct vent, fully condensing commercial gas water heater with an internal helical heat exchanger

This helical heat exchanger helps Force 90+ achieve 96% thermal efficiency and deliver outstanding hot water output

Exclusive State designed touch display control system

Built-in diagnostics and operational information

Spiral heat exchanger keeps hot combustion gases in the tank longer to lengthen the heat transfer cycle

Positioned in the center of the tank for more even heat distribution

Spiral design reduces lime scale formation on the heat exchanger to maintain high efficiency operation over time

SIDE-MOUNTED HOT and COLD RECIRCULATING TAPS-Allows Force 90 to be installed as part of combination space heating/water heating applications

BLUE DIAMOND® GLASS COATING-Provides superior corrosion resistance compared to industry-standard glass lining

Co regard ANODE ROD-anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods

Energy Star® Rated

Lead-Free

Modulating Ultra Force High Efficiency Power Vent is an industry leader in high efficiency commercial water heating

The current modulating models adjust firing rate to the specific demand further increasing efficiency and money savings

Exclusive State designed color touch display control system

Provides detailed water heater status information

Built-in diagnostics

Intelligent Demand Response (IDR) feature senses large water draws and automatically adjusts the differential set point

This feature increases the hot water available when it is needed the most

SUBMERGED COMBUSTION CHAMBER, with HELICAL HEAT EXCHANGER COIL-Positioned in center of tank, surrounded by water to virtually eliminate radiant heat loss from chamber

Spiral heat exchanger keeps hot burner gases swirling, uses centrifugal force to maximize efficiency of heat transfer to water in tank

Spiral heat exchanger reduces lime scale from forming on water-side surfaces, which maintains energy efficiency over time

POWERED ANODES Standard ON ALL MODELS-Provides long-lasting tank protection in varying water conditions

Powered anodes are non-sacrificial

Automatically adjusts output needed to properly protect the tank

MECHANICAL VENTING VERSATILITY-Conventional power venting or direct venting

Vents vertically or through a sidewall

Front located exhaust and condensate connections allow for easy install and access

Energy Star® Rated

Lead-Free

Modulating Ultra Force High Efficiency Power Vent is an industry leader in high efficiency commercial water heating

The current modulating models adjust firing rate to the specific demand further increasing efficiency and money savings

Exclusive State designed color touch display control system

Provides detailed water heater status information

Built-in diagnostics

Intelligent Demand Response (IDR) feature senses large water draws and automatically adjusts the differential set point

This feature increases the hot water available when it is needed the most

SUBMERGED COMBUSTION CHAMBER, with HELICAL HEAT EXCHANGER COIL-Positioned in center of tank, surrounded by water to virtually eliminate radiant heat loss from chamber

Spiral heat exchanger keeps hot burner gases swirling, uses centrifugal force to maximize efficiency of heat transfer to water in tank

Spiral heat exchanger reduces lime scale from forming on water-side surfaces, which maintains energy efficiency over time

POWERED ANODES Standard ON ALL MODELS-Provides long-lasting tank protection in varying water conditions

Powered anodes are non-sacrificial

Automatically adjusts output needed to properly protect the tank

MECHANICAL VENTING VERSATILITY-Conventional power venting or direct venting

Vents vertically or through a sidewall

Front located exhaust and condensate connections allow for easy install and access

Energy Star® Rated

Lead-Free