This is a series of compact, rugged, Heavy Duty controls for use on large residential, commercial and industrial application

The Field Type M plus MG2 Draft Control provides precise draft regulations for solid fuels, oil, gas or oil/gas appliances requiring only the simplest, on-the-job adjustments depending on which fuel is to be utilized

This is a series of compact, rugged, Heavy Duty controls for use on large residential, commercial and industrial application

The Field Type M plus MG2 Draft Control provides precise draft regulations for solid fuels, oil, gas or oil/gas appliances requiring only the simplest, on-the-job adjustments depending on which fuel is to be utilized

The Field Type RC draft control is furnished as standard equipment on many leading brands of oil- or coal-fired heating equipment

The Type RC is calibrated to allow for easy adjustment to the furnace or boiler manufacturers specifications

Designed for settings from 0.02 Inch to 0.08 Inch, this control is so sensitive that instrumentation should be used when adjusting the unit during installation

A double-acting control for gas-fired furnaces and boilers is widely used for conversion burner installations, gas draft-induced appliance operation with mechanical draft inducers or sidewall power venters

It is also recommended for use on gas atmospheric appliances where a draft hood cannot be installed and can improve combustion stability and draft on many gas atmospheric installations with venting problems

The MG-1 provides precise, accurate control of drafts at levels higher than permitted by a standard draft diverter, which is a frequent requirement with gas

Because it is double-acting, it opens out to relieve positive vent system pressures as low as 0.01 Inch Draft adjustments using weights are simple and accurate from 0.01 Inch to 0.1 Inch