S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Remove pipe gasket before installation
Alternate choice for changing direction, inspection (TC) or collecting condensate vertically or horizontally (TCD)
Reference instructions for friction loss
No toxic glues or primers
Simple, easy to install product offering
Environmentally-friendly and fully recyclable
Used to connect Polyflue directly to appliance outlets sized for nominal diameter
Field RTV appliance connection as necessary
No toxic glues or primers
Simple, easy to install product offering
Environmentally-friendly and fully recyclable
No toxic glues or primers
Simple, easy to install product offering
Environmentally-friendly and fully recyclable
Used to drain condensate away from inline drains (CD) or drain tee caps (TCD)
No toxic glues or primers
Simple, easy to install product offering
Environmentally-friendly and fully recyclable
No toxic glues or primers
Simple, easy to install product offering
Environmentally-friendly and fully recyclable
Used to connect Polyflue directly to appliance outlets sized for nominal diameter
Field RTV appliance connection as necessary
More Versatile
Easier
Quicker
Safer
0 Inch clearance to combustibles
No toxic glues or primers
Simple, easy to install product offering
2 to 4 Inch single-wall rigid and flexible pipe
Environmentally-friendly and fully recyclable
If Used Horizontally a Condensate Drain Must be Installed Immediately Downstream
More Versatile
Easier
Quicker
Safer
0 Inch clearance to combustibles
No toxic glues or primers
Simple, easy to install product offering
2 to 4 Inch single-wall rigid and flexible pipe
Environmentally-friendly and fully recyclable
No toxic glues or primers
2 to 4 Inch diameter single-wall rigid and flexible pipe
Viton® Integral Gasket for superior sealing performance
Simple, easy to install product offering
Locking bands can be installed during or after the installation, providing ultimate flexibility
Environmentally-friendly and fully recyclable
More Versatile
Easier
Quicker
Safer
0 Inch clearance to combustibles
No toxic glues or primers
Simple, easy to install product offering
2 to 4 Inch single-wall rigid and flexible pipe
Environmentally-friendly and fully recyclable
For Weatherizing and securing flex pipe to top of unused Vent when relining
Alternate choice, horizontal or vertical, if no provision for collecting condensate is available at the appliance
For 2 Inch, if needed horizontally, use a Tee with branch pointing down and a Drain Tee Cap (TCD)
Requires 7/8 Inch diameter condensate tube
Field cut in 20 Inch or 40 Inch increments, as necessary
Can be used as a single continuous vent system in a multi-story vertical combustible chase at 0 inch clearance
Can be field cut in half, if necessary, to install after pipe installation
Plastic flexible centering spacer used for masonry flex re-line installations at every 7 foot above the base support
Packaged with the FLEX-KIT
Secures around the corrugations in the flexible pipe as the flexible pipe is being dropped down
White UV Resistant
Use with twin pipe to concentric adapter (CTA) for one penetration through the wall for exhaust and air intake
Can be field cut shorter if necessary
Install with a 0.375 Inch/foot (2 deg) upward slope away from appliance
Only one support needed for horizontal concentric terminations
Used to connect Polyflue directly to appliance outlets sized for PVC OD
Field RTV appliance connection as necessary
More Versatile
Easier
Quicker
Safer
0 Inch clearance to combustibles
No toxic glues or primers
Simple, easy to install product offering
2 to 4 Inch single-wall rigid and flexible pipe
Environmentally-friendly and fully recyclable
No toxic glues or primers
2 to 4 diameter single-wall rigid and flexible pipe
Viton® Integral Gasket for superior sealing performance
Simple, easy to install product offering
Locking bands can be installed during or after the installation, providing ultimate flexibility
Environmentally-friendly and fully recyclable
Alternate choice, horizontal or vertical, if no provision for collecting condensate is available at the appliance
For 2 Inch if needed horizontally, use a Tee with branch pointing down and a Drain Tee Cap (TCD)
Can be field cut in half, if necessary, to install after pipe installation
Plastic flexible centering spacer used for masonry flex re-line installations at every 7 foot above the base support
Packaged with the FLEX-KIT
Secures around the corrugations in the flexible pipe as the flexible pipe is being dropped down
White UV Resistant
Use with twin pipe to concentric adapter (CTA) for one penetration through the wall for exhaust and air intake
Can be field cut shorter if necessary