Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

RoHS Compliant

Reach Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant

Arched top, concave sidewalls and rounded corners provide uniform tensile loading and uniform pulley sidewall contact for excellent belt service life and reduced pulley wear

The vulcanized Flex-bonded tensile cords provide superior resistance to tensile and flexing forces, fatigue and shock loads

The Flex Weave oil and heat resistant cover protects the belt core from the toughest environments

Flex-Bonded Cords are strongly bound to the body of the belt, resulting in equal load distribution and absorption of bending stress without cord deterioration

Gates® Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life

The Flex-Weave® Cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat

Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX

Belt Edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear

Match system - All sizes meet Gates UNISET tolerances they can be installed without matching

Meets RMA oil and heat resistant standards and static conductivity requirements

High quality rubber compound protects the belt against heat, ozone and sunlight

The belt will not catch fire from heat buildup, even with severe slippage

Long belt life reducing replacement and maintenance costs

Excellent performance/cost ratio

Reliability and efficiency

Reach Compliant

RoHS Compliant