Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
View:
15" H, 1.5 to 3 Ton, Non-Bleed, Uncased Evaporator Coil for Air Conditioner

High efficiency lanced fin design

R-22, R-410A, AC and Heat Pump compatible

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs then charged with dry air

Downflow drip shields are molded into drain pan

Filter-friendly top plate on most models (except 22 Inch and above)

Down-turned headers are sized out to easily receive line set

Factory software for TXV failure testing

Includes die-cut foam sheet for sealing, drain ELL, drain hose and clamp

Dedicated upflow/downflow

Copper refrigerant connections for easy brazing

Rifled copper tubing

You must be logged in to order this item. Log in here
19" H, 3 to 5 Ton, Non-Bleed, Uncased Evaporator Coil for Air Conditioner

High efficiency lanced fin design

R-22, R-410A, AC and Heat Pump compatible

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs then charged with dry air

Downflow drip shields are molded into drain pan

Filter-friendly top plate on most models (except 22 Inch and above)

Down-turned headers are sized out to easily receive line set

Factory software for TXV failure testing

Includes die-cut foam sheet for sealing, drain ELL, drain hose and clamp

Dedicated upflow/downflow

Copper refrigerant connections for easy brazing

Rifled copper tubing

You must be logged in to order this item. Log in here
18" x 19-1/2" x 19", 500 PSI, 60 MBTU/Hr, 3 to 5 Ton, Uncased, Housing Evaporator Coil for Air Conditioner and Heat Pump

High efficiency lanced fin design

R-22, R-410A, AC and Heat Pump compatible

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air

Downflow drip shields are molded into drain pan

Filter-friendly top plate on most models

Down-turned headers are sized out to easily receive line set

Factory software for TXV failure testing

Includes die-cut foam sheet for sealing, drain ELL, drain hose and clamp

Dedicated upflow/downflow

Copper refrigerant connections for easy brazing

Rifled copper tubing

Made in USA

You must be logged in to order this item. Log in here
9.6 KW Element, 208/230 VAC 1-Phase, 1/2 HP, Downflow, Electric Furnace

Zero clearance feature allows the EBE/EUE unit to be installed where space is a premium

Pre-painted white front panels provide a scratch resistant, attractive, easy to clean appliance finish

Built-in coil cabinet is design-matched to work in conjunction with EBE/EUE furnaces, heat pumps and air conditioners manufactured by Johnson Controls in Wichita, Kansas, providing ease of installation and highly efficient operating performance

The EBE/EUE unit has a coil shelf installed and a solid door

Air Conditioner and Heat Pump operation ready

All models have a multi-speed blower capable of handling cooling and heat pump loads

Heating package includes specifically designed, long lasting nickel/chrome heat elements

Universal throw-away filter cleans the air and is easy to replace on the EBE unit. No filters are furnished with EUE models

External filter base and/or filter rack needed for field installation

You must be logged in to order this item. Log in here
14.4 KW Element, 208/230 VAC 1-Phase, 1/2 HP, Downflow, Electric Furnace

Zero clearance feature allows the EBE/EUE unit to be installed where space is a premium

Pre-painted white front panels provide a scratch resistant, attractive, easy to clean appliance finish

Built-in coil cabinet is design-matched to work in conjunction with EBE/EUE furnaces, heat pumps and air conditioners manufactured by Johnson Controls in Wichita, Kansas, providing ease of installation and highly efficient operating performance

The EBE/EUE unit has a coil shelf installed and a solid door

Air Conditioner and Heat Pump operation ready

All models have a multi-speed blower capable of handling cooling and heat pump loads

Heating package includes specifically designed, long lasting nickel/chrome heat elements

Universal throw-away filter cleans the air and is easy to replace on the EBE unit. No filters are furnished with EUE models

External filter base and/or filter rack needed for field installation

You must be logged in to order this item. Log in here
19.2 KW Element, 208/230 VAC 1-Phase, 1/2 HP, Downflow, Electric Furnace

Zero clearance feature allows the EBE/EUE unit to be installed where space is a premium

Pre-painted white front panels provide a scratch resistant, attractive, easy to clean appliance finish

Built-in coil cabinet is design-matched to work in conjunction with EBE/EUE furnaces, heat pumps and air conditioners manufactured by Johnson Controls in Wichita, Kansas, providing ease of installation and highly efficient operating performance

The EBE/EUE unit has a coil shelf installed and a solid door

Air Conditioner and Heat Pump operation ready

All models have a multi-speed blower capable of handling cooling and heat pump loads

Heating package includes specifically designed, long lasting nickel/chrome heat elements

Universal throw-away filter cleans the air and is easy to replace on the EBE unit. No filters are furnished with EUE models

External filter base and/or filter rack needed for field installation

You must be logged in to order this item. Log in here
80000 BTU/Hr, 95% AFUE, 1200 CFM, 1-Stage, Multi-Position, Natural, Gas Furnace

Easily applied in upflow or downflow installation with minimal conversion necessary

Compact, easy to install, ideal height 33 in. tall cabinet

Blower-off delay for cooling SEER improvement

Easy access to controls to connect power/control wiring

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit amp requirement for easy replacement application

All models are convertable to use propane gas

Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability

100% Shut-Off main gas valve for extra safety

5 Speed, direct drive standard ECM motor

You must be logged in to order this item. Log in here
70000 BTU/Hr Input, 4 Ton Cooling, 0.8% AFUE, 1/2" FPT, 1-Stage, Downflow, Gas Furnace

Zero Clearance Feature Allows these furnaces to be installed where space is a premium

Molded Contoured White Upper Panel Provides an attractive modern appearance and offers a scratch-resistant, durable appliance finish

Pre-Painted Contoured White Lower - Panels provide an attractive scratch-resistant appliance finish

Built-in Coil Cabinet Is design-matched to work in conjunction with Coleman heat pumps and air conditioners, providing ease of installation and highly efficient operating performance

Standard ECM Blower Provides energy efficiency while providing 5 speed tap options

Aluminized Steel Heat Exchanger Provides efficient operation and unmatched corrosion resistance

Universal Disposal Filters Clean the air and are easy to replace

Sealed Combustion Design draws in combustion air directly from outside, providing quiet operation while increasing operating efficiency and reducing cold drafts

Conversion to propane gas is fast and easy All models are provided with a convertible gas valve and gas orifices for both natural and propane gas

You must be logged in to order this item. Log in here
77000 BTU/Hr Input, 4 Ton Cooling, 0.8% AFUE, 1/2" FPT, 1-Stage, Downflow, Gas Furnace

Zero Clearance Feature Allows these furnaces to be installed where space is a premium

Molded Contoured White Upper Panel Provides an attractive modern appearance and offers a scratch-resistant, durable appliance finish

Pre-Painted Contoured White Lower - Panels provide an attractive scratch-resistant appliance finish

Built-in Coil Cabinet Is design-matched to work in conjunction with Coleman heat pumps and air conditioners, providing ease of installation and highly efficient operating performance

Standard ECM Blower Provides energy efficiency while providing 5 speed tap options

Aluminized Steel Heat Exchanger Provides efficient operation and unmatched corrosion resistance

Universal Disposal Filters Clean the air and are easy to replace

Sealed Combustion Design draws in combustion air directly from outside, providing quiet operation while increasing operating efficiency and reducing cold drafts

Conversion to propane gas is fast and easy All models are provided with a convertible gas valve and gas orifices for both natural and propane gas

You must be logged in to order this item. Log in here
60000 BTU/Hr Input, 3 Ton Cooling, 0.95% AFUE, 1/2" NPT, Multi-Position, Upflow, Convertible, Gas Furnace

Easily applied in upflow or downflow installation with minimal conversion necessary

Compact, easy to install, ideal height 33 inch tall cabinet

Blower-off delay for cooling SEER improvement

Easy access to controls to connect power/control wiring

Built-in, high level Self- diagnostics with fault code displays standard on integrated control module for reliable operation

Low unit amp requirement for easy replacement application

All models are convertable to use propane (LP) gas

Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability

100% shut off main gas valve for extra safety

Hi-tech tubular aluminized steel primary heat exchanger

Secondary heat exchanger made of corrosion resistant stainless steel materials

Timed on, adjustable off blower capability for maximum comfort

Blower door safety switch

No knockouts to deal with, making installation easier

Quiet inducer operation

Slide-out blower assembly for easy access and removal of blower

Patented Self-priming internal condensate trap design for easy installation

Energy StarĀ® Rated

You must be logged in to order this item. Log in here
Booster Assembly with Motor for DGAX056/DGAX070/DGAX077/DGAX090 Gas Furnace
Item#:
87095
Manufacturer Item:
S1-37319801821
You must be logged in to order this item. Log in here
Control Board for DGAX056/DGAX070/DGAX077/DGAX090 Gas Furnace
Item#:
87096
Manufacturer Item:
S1-03102951001
You must be logged in to order this item. Log in here
Valve for DGAA056BDTD/DGAA070BDTD/DGAH056BBSD Gas Furnace
Item#:
87097
Manufacturer Item:
S1-02543267000
You must be logged in to order this item. Log in here
ECM, Blower Motor for DGAX 4-Ton Furnace
Item#:
87098
Manufacturer Item:
S1-02439710000
You must be logged in to order this item. Log in here
Pressure Switch for DGAX056/DGAX070/DGAX077/DGAX090 Gas Furnace
Item#:
87094
Manufacturer Item:
S1-32435972000
You must be logged in to order this item. Log in here
18", 23" x 9" x 9", Exterior Extension for Roof Jack
Item#:
87070
Manufacturer Item:
7680B6541
You must be logged in to order this item. Log in here
10.5 Oz, Multi-Seal, Roof Jack Sealant
Item#:
87071
Manufacturer Item:
S1-BOSS12503
You must be logged in to order this item. Log in here
72000 BTU/Hr, 5 Ton, 95% AFUE, Top Return, Downflow, Gas Furnace
Item#:
85295
Manufacturer Item:
MG2R-072FB
You must be logged in to order this item. Log in here
51 to 95" Extension, Roof Jack Crown Assembly for RE9/RG1/M5 Gas Furnace
Item#:
85109
Manufacturer Item:
903666A
You must be logged in to order this item. Log in here
2/12" Pitch, 27 to 47" Extension, Aluminum, Roof Jack for RG1 80% AFUE Gas Furnace
Item#:
85104
Manufacturer Item:
903663
You must be logged in to order this item. Log in here
35000 BTU, 4 Ton Cooling, 10 KW, Downflow, Multi-Speed, Electric Furnace

Nichrome heating elements for long lasting efficient heat

Item#:
85117
Manufacturer Item:
RE9D10C4
You must be logged in to order this item. Log in here

903107 RG1/RO1 18" REVOLV MH ROOF JACK EXT-INT

This item has been discontinued and replaced by item 
18" Interior, Roof Jack Extension for RG1/R01 Gas Furnace
Item#:
85111
Manufacturer Item:
903107
You must be logged in to order this item. Log in here
10" Interior, Roof Jack Extension for RE9/RG1/M5 Gas Furnace
Item#:
85110
Manufacturer Item:
901935
You must be logged in to order this item. Log in here
77 MBH Input/6 MBH Output, 80% AFUE, Downflow, Gas Furnace

Sealed Combustion Vents Exhaust Gases Directly Outdoors and Draws in Outside Fresh Air for Combustion

Modern Hot Surface Ignition No Pilot Lights to Blow Out

Low Maintenance Sealed Bearings on Motors, Reliable Controls and Burners

Appliance Quality Metal Door - With Baked Enamel Finish for Long Life and Easy Cleaning

Unique Manufactured Housing Design with a Robust, 19-3/4 Inch Width, Fully Insulated Cabinet to Fit the Standard MH Footprint

The RG1 is Our Most Economical

Quick Liquid Propane Conversion with an Easy-Access Inducer Assembly and Gas Valve, Using the Factory-Provided Low Propane Orifice Included in the Unit-Literature Kit

Numerous Application Accessories Save the Hassle of Field-Fabrication, Sourcing and Repeat Supply-House Trips

On New or Replacement Jobs

HUD Compliant

Item#:
85115
Manufacturer Item:
RG1D77C3
You must be logged in to order this item. Log in here
16" Exterior, Roof Jack Extension for RE9/RG1/M5 Gas Furnace
Item#:
85112
Manufacturer Item:
901937
You must be logged in to order this item. Log in here
Vent Transition Kit for 8" RG7 Gas Furnace
Item#:
85165
Manufacturer Item:
904106
You must be logged in to order this item. Log in here
24" x 20" x 20", Coil Cabinet for RG1/RG7 Gas Furnace
Item#:
85163
Manufacturer Item:
911969A
You must be logged in to order this item. Log in here
View: