Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
View:
Gasket for 3/8" Refrigerant Hose (10 per Pack)

Made in USA

Item#:
55781
Manufacturer Item:
P90016
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
Gasket Cap for 1/4" CLE/CLV/CLBV Series Hose (10 per Pack)
Item#:
55785
Manufacturer Item:
P511-10
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
Gasket Cap for 1/4" Hose (10 per Pack)
Item#:
55784
Manufacturer Item:
P509-10
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4", Hose Depressor for CLE/CLV/CLBV Kobra Hose (5 per Pack)
Item#:
55787
Manufacturer Item:
P90514
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
O-Ring for T21295/33112RK Refrigerant Hose (10 per Pack)

Made in USA

Item#:
55786
Manufacturer Item:
P90022
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" x 1/4", QC x SAE Flare, Brass, Refrigeration Access Valve Shut-Off Coupler

Use this Quick Coupler with Existing Charging Hose

Immediately Traps Refrigerant Discharge from Hose When Disconnecting from Access Fitting

Made in USA

Item#:
54807
Manufacturer Item:
33112N
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" x 1/4", QC x SAE 90D Flare, Brass, Refrigeration Access Valve Shut-Off Coupler

Use this Quick Coupler with Existing Charging Hose

Immediately Traps Refrigerant Discharge from Hose When Disconnecting from Access Fitting

Made in USA

Item#:
54808
Manufacturer Item:
33113N
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" Quick Coupler, Hose Secure Seal Rebuild Kit

Made in USA

Item#:
54809
Manufacturer Item:
33112RK
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4", Liquid Charging Adapter for Refrigeration and Air Conditioner Access Valve

Metering element reduces liquid flow to a level below capacity of compressor

This assures a safe, fast charge without damaging the compressor

Accepts liquid refrigerant from the cylinder and discharges into low side of the system

a liquid charger adapter is necessary for safe and fast liquid charging through the low side of a system

Eliminates the time and effort of heating cylinders

Made in USA

Item#:
54795
Manufacturer Item:
LC-4
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
5/16" Quick Coupler x 1/4" SAE, Brass, Coupler for Refrigeration Access Valve

Made in USA

Item#:
54796
Manufacturer Item:
QC-S5
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
Item#:
7001364
Manufacturer Item:
DV-22W
You must be logged in to order this item. Log in here
Item#:
7001365
Manufacturer Item:
DV-22W-SNR
You must be logged in to order this item. Log in here
Item#:
7000912
Manufacturer Item:
MR-533
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
7001249
Manufacturer Item:
22625
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
7000779
Manufacturer Item:
A10974-BX
You must be logged in to order this item. Log in here
1/2" NPT, 5" Dial, 0 to 250 Deg F, 304 Stainless Steel Case, Fahrenheit Scale, Dial Thermometer with Recalibrator
Item#:
81329
Manufacturer Item:
5VBM4
Manufacturer:
WEISS INSTRUMENTS LLC.
You must be logged in to order this item. Log in here
Hanging Hook for Zeppelin Manifold
Item#:
83123
Manufacturer Item:
M2-102N
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
Item#:
83105
Manufacturer Item:
M2-250
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
Item#:
83106
Manufacturer Item:
M2-500
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
2-1/2", 1/8" MPT, 0 to 500 PSI, Dial Display, Blue, Steel, Brass, Compound, Low Side, Standard, Manifold Compound Gauge

Recalibration Screw

Full Size Brass Movements

Made in USA

Item#:
83117
Manufacturer Item:
M2-250B
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
2-1/2", 1/8" MPT, 0 to 500 PSI, Dial Display, Red, Steel, Brass, High Side, Standard, Manifold Pressure Gauge

Recalibration Screw

Full Size Brass Movements

Made in USA

Item#:
83119
Manufacturer Item:
M2-500B
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1-1/2", Screw-On, Lens for Plastic and Metal Manifold Gauge

Made in USA

Item#:
83112
Manufacturer Item:
MR-517
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4", Spring, Refrigeration Access Valve Coupler Clip Depressor (5 per Pack)

Made in USA

Item#:
83090
Manufacturer Item:
P90513
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" x 6", 800 PSI Working, 4000 PSI Burst, Blue, Nitrile Cover, Single, High Pressure, Whip End, Ball Valve Hose

CLV-6 Series hoses feature a ball valve 6" whip end with ball valve that opens to full flow

These can be used as replacements for the CLV Kobra® high pressure series or to connect to other hose fittings

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place

This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place

Kobra® high pressure hoses are made from Kevlar® the same material that stops bullets in bullet proof vests

Kevlar® makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene

Made in USA

Item#:
83097
Manufacturer Item:
CLV-6B
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" x 6", 800 PSI Working, 4000 PSI Burst, Yellow, Nitrile Cover, Single, High Pressure, Whip End, Ball Valve Hose

CLV-6 Series hoses feature a ball valve 6" whip end with ball valve that opens to full flow

These can be used as replacements for the CLV Kobra® high pressure series or to connect to other hose fittings

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place

This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place

Kobra® high pressure hoses are made from Kevlar® the same material that stops bullets in bullet proof vests

Kevlar® makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene

Made in USA

Item#:
83098
Manufacturer Item:
CLV-6Y
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" ID x 72" L, 800 PSI, Blue/Yellow/Red, Nitrile, High Pressure, Charging Hose with Lever Style Ball Valve

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place

Made in USA

Item#:
83095
Manufacturer Item:
CCLV-72
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" x 6", 800 PSI Working, 4000 PSI Burst, Red, Nitrile Cover, Single, High Pressure, Whip End, Ball Valve Hose

CLV-6 Series hoses feature a ball valve 6" whip end with ball valve that opens to full flow

These can be used as replacements for the CLV Kobra® high pressure series or to connect to other hose fittings

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place

This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place

Kobra® high pressure hoses are made from Kevlar® the same material that stops bullets in bullet proof vests

Kevlar® makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene

Made in USA

Item#:
83096
Manufacturer Item:
CLV-6R
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
Aluminum, 2-Valve, Manifold

Machined from durable, solid aluminum billets

Rubber handwheels for improved grip and reduced turns to open/close

Improved stem design fully open in only 2-1/2 turns

Surge dampened gauges for reduced needle movement

Original free floating dual o-ring sealing system for faster evacuation and charging

Easy-to-read, color coded refrigerant dials

Replaceable, durable hanging hook

Replaceable intake/hose holder fittings

Made in USA

Item#:
83064
Manufacturer Item:
24125
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" x 60", 800 PSI Working, 4000 PSI Burst, Blue/Yellow/Red, Nitrile Cover, High Pressure, Hose Set (3 per Pack)

CLE Series hoses feature a blowout resistant gasket

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place

This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place

Kobra® high pressure hoses are made from Kevlar® the same material that stops bullets in bullet proof vests

Kevlar® makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene

Made in USA

Item#:
83062
Manufacturer Item:
CCLE-60
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" ID x 60" L, 800 PSI, Yellow, Nitrile, High Pressure, Charging Hose

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place

This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place

Made in USA

Item#:
83063
Manufacturer Item:
CLE-60Y
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" ID x 60" L, 800 PSI, Blue/Yellow/Red, Nitrile, High Pressure, Charging Hose with Lever Style Ball Valve

CLBV Series hoses feature a ball valve fitting at the end that opens to full flow

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

Kevlar lined for strength and flexibility

No blow-outs at high pressures

UV protective bag to prevent color fading

Custom lengths and fittings

Made in USA

Item#:
83068
Manufacturer Item:
CCLBV-60
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" ID x 60" L, 800 PSI, Blue, Nitrile, High Pressure, Charging Hose

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place

This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place

Made in USA

Item#:
83066
Manufacturer Item:
CLE-60B
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" ID x 60" L, 800 PSI, Red, Nitrile, High Pressure, Charging Hose

Gasket seal, high pressure charging hose

Blow-out resistant gasket locks into the cup of the fitting

Barbed depressor precisely machined to guide the valve core into place

Easy grip

Made out of Kevlar®

Made in USA

Item#:
83067
Manufacturer Item:
CLE-60R
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
1/4" ID x 60" L, 800 PSI, Blue, Nitrile, High Pressure, Charging Hose with Lever Style Ball Valve

CLBV Series hoses feature a ball valve fitting at the end that opens to full flow

Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket

Kevlar lined for strength and flexibility

No blow-outs at high pressures

UV protective bag to prevent color fading

Custom lengths and fittings

Made in USA

Item#:
83075
Manufacturer Item:
CLBV-60B
Manufacturer:
J/B INDUSTRIES INC
You must be logged in to order this item. Log in here
View: