Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
|◀ 1 - 36 of 385 ▶|
View:
200 Sq Foot per Gallon Coverage, -4 Deg F Flash Point, Neoprene Base, Amber, Contact Adhesive

Contact Adhesive is a reliable way to join seams and butt joints of elastomeric pipe and sheet insulation. It is ideal for bonding porous and non-porous materials, as it is not absorbed easily

Item#:
44304
Manufacturer Item:
800-320-PTB
You must be logged in to order this item. Log in here
200 Sq Foot per Gallon Coverage, -4 Deg F Flash Point, Neoprene Base, Amber, Insulation Contact Adhesive

Contact Adhesive is a reliable way to join seams and butt joints of elastomeric pipe and sheet insulation

It is ideal for bonding porous and non-porous materials, as it is not absorbed easily

Made in USA

Item#:
44306
You must be logged in to order this item. Log in here
1-1/2" x 18", 18 Gauge, Safety Nail Plate
Item#:
13395
Manufacturer Item:
FHA-200
You must be logged in to order this item. Log in here
3" x 18", 18 Gauge, 4-Hole, Safety Nail Plate
Item#:
13394
Manufacturer Item:
FHA-300-1818
You must be logged in to order this item. Log in here
24" x 1-1/2", 16 Gauge, Nail Plate for HVAC Safety (50 per Carton)

8 hole pattern positioned on each end of FHA plate required by codes

Item#:
13393
Manufacturer Item:
FHA-400-2416
You must be logged in to order this item. Log in here
2.5" x 1" x 3", Rugged/Molded Black ABS, Capacitor Shelf with High Strength Magnet/12" Wire Tie and #8 x 5/8" Screw for HVAC/R System

Frees up Space Inside Crowded Condensing Unit

These Handy Shelves Can be Used with any Size Capacitor, to Provide a Neat, Secure Mounting Area

Item#:
94843
Manufacturer Item:
CSWM1
You must be logged in to order this item. Log in here
2.25" x 1" x 3", Rugged/Molded Black ABS, Capacitor Shelf with Cable Tie/12" L Wire Tie and Mounting Screw for HVAC/R System
Item#:
94842
Manufacturer Item:
CSX4
You must be logged in to order this item. Log in here
32" x 32" x 3", 464 Lb Load, Expanded Polystyrene Core, Lightweight, Concrete, Equipment Pad

Design is similar to the California Ultralight Pad, but without the internal metal band for unit attachment

However anchors may still be used for light-duty tethering

Lightweight, durable and optimized for HVAC outdoor unit weights

Concrete outer skin and EPS foam core provide flexibility and vibration dampening

Environmentally friendly made from 15% recycled material

Non-skid surface

Unaffected by water, soil, fungus, bacteria, UV exposure or extreme weather

Concrete gray color

Drillable

Ultralite® Pad is a lightweight pad designed to support HVAC outdoor units and other outdoor equipment

It is designed for high vibration applications, where noise transmission is an issue

The concrete outer skin and EPS foam inner core provide flexibility and vibration dampening respectively

Limited Lifetime Warranty

Made in USA

Item#:
26933
Manufacturer Item:
UC3232-3
You must be logged in to order this item. Log in here
36" x 42" x 3", 454 Lb Load, Gray Cement, Concrete Outer, Expanded Polystyrene Inner Core, Lightweight, Domestic, Equipment Pad

Light Weight Concrete Pad

The Ultralite® Pad Performs Extraordinarily Well Under Strict Testing Criteria. it Does Not Craze, Soften, or Delaminate. Ultralite® has a Proven Resistance against R-22 and R-134A, Compressor Oil, Salt Solution, and Synthetic Canine Urine

The Ultralite® Lightweight Concrete Pad is Specifically Engineered to have Long-Term Exterior Weather Resistance

Textured Surface Prevents Equipment Sliding

Match any Equipment Size

Time and Labor Saving

The Engineered Polystyrene Core in the Ultralite® Lightweight Concrete Pad Absorbs and Dampens Vibration Associated with Normal Operation of a Condensing Unit

Water Vapor Evaporates through the Ultralite®, Preventing the Expansion of Cracks

Flame Resistant

Made in USA

Item#:
26937
Manufacturer Item:
UC3642-3
You must be logged in to order this item. Log in here
18" x 38" x 3", 1000 Lb Load, Concrete Gray Injection Molded Polypropylene, Self-Leveling Ground Support, HVAC Outdoor Unit Equipment Pad

DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

Post-consumer recycled polypropylene for lightweight yet more durable heft that is unaffected by UV or weather

Drillable Easy to secure equipment to the pad

Uniform Ribbing Transfers Load Generous ribbing underneath the pad spreads the load evenly and ensures pad strength

Subtle Top Texture Helps prevent equipment from moving and enhances stability

Easy to Identify Size Each E Lite® pad is molded with its size in raised letters

Additional Surface Support The bottom of a 3 Inch E Lite® pad shows generous ribbing plus additional surface for added pad strength

Lightweight E Lite® pads are light and easy to maneuver

Made in USA

Lifetime Limited Warranty

Item#:
26998
Manufacturer Item:
EL1838-3
You must be logged in to order this item. Log in here
3" x 3" x 7/8" Thick, 50 Lb, Rubber/Cork, Anti Vibration Pad

The Rubber Outer Padding Adds Stability and Resists Oil, as well as Being Stackable

The 90 Degree Rib Rotation of Top and Bottom Rubber Layers Offers Maximum Vibration Damping Regardless of Equipment Orientation

The High Quality Rubber and Cork Construction Makes for an Affordable and Long Lasting Antivibration Pad

Made in USA

Item#:
43909
Manufacturer Item:
MP-3C
You must be logged in to order this item. Log in here
2" x 2" x 7/8", 50 PSI, Ethylene Vinyl Acetate, Ribbed, Anti-Vibration Pad

The EVA Pad was tested against other pads at four different vibration settings

In the most severe vibration extremes the EVA Pad outperforms cork and rubber by a margin of greater than 3:1 This is due to the special composite foam center which is much more structurally sound than cork

It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber

All this at a very competitive price

Designed to withstand 50 psi

Item#:
43908
Manufacturer Item:
MP-2E
You must be logged in to order this item. Log in here
Plastic, Insulated, Staple for Channel
Item#:
42985
Manufacturer Item:
70401
You must be logged in to order this item. Log in here
3/8", Steel, Flat Washer
Item#:
42987
Manufacturer Item:
70410
You must be logged in to order this item. Log in here
3/8", Steel, Standard, Hex Nut
Item#:
42986
Manufacturer Item:
70405
You must be logged in to order this item. Log in here
3/8", Nylon Cone, Top Spring, Channel Cone Nut
Item#:
42989
Manufacturer Item:
70420
You must be logged in to order this item. Log in here
3/8" Screw, Malleable/Ductile Iron, Beam Clamp (100 per Pack)

Mars C-Clamp are Used to Replace Various Other Clamps as Top Beam or Bottom Beam Structural Steel Attachments

Item#:
42988
Manufacturer Item:
70415
You must be logged in to order this item. Log in here
3/8", Steel, Square, Washer (100 per Pack)
Item#:
42990
Manufacturer Item:
70411
You must be logged in to order this item. Log in here
1/2", Steel, Standard, Hex Nut for Channel
Item#:
42992
Manufacturer Item:
70406
You must be logged in to order this item. Log in here
3/8", Steel, Standard, Rod Coupling (50 per Pack)
Item#:
42991
Manufacturer Item:
70425
You must be logged in to order this item. Log in here
3/8" x 1", Steel, Hex Head, Cap Screw for Channel
Item#:
42994
Manufacturer Item:
70435
You must be logged in to order this item. Log in here
1" IPS, Steel, Clevis, Pipe Hanger

Supports non-insulated, stationary lines, Rigid/IMC Conduit and pipe

Item#:
42993
Manufacturer Item:
70430
You must be logged in to order this item. Log in here
1", Conduit Pipe Hanger with Bolt (100 per Pack)

Supports EMT and Rigid conduit or pipe

Item#:
42996
Manufacturer Item:
70445
You must be logged in to order this item. Log in here
1-1/2" IPS, Steel, Clevis, Pipe Hanger

Supports non-insulated, stationary lines, Rigid/IMC Conduit and pipe

Item#:
42995
Manufacturer Item:
70432
You must be logged in to order this item. Log in here
3/8 to 1/2", Conduit Pipe Hanger with Bolt (100 per Pack)

Supports EMT and Rigid conduit or pipe

Item#:
42998
Manufacturer Item:
70447
You must be logged in to order this item. Log in here
3/4", Conduit Pipe Hanger with Bolt (100 per Pack)

Supports EMT and Rigid conduit or pipe

Item#:
42997
Manufacturer Item:
70446
You must be logged in to order this item. Log in here
1-3/8 to 2-1/2" OD, Adjustable, Clevis, Tubing Pipe Clamp (100 per Pack)
Item#:
42999
Manufacturer Item:
70442
You must be logged in to order this item. Log in here
2" x 30', 1/8" Thick, Black, Elastomeric Foam, Closed Cell, Flexible, Foam Tape

The factory-applied pressure-sensitive adhesive adheres firmly and forms a long-lasting bond, while the closed cell structure of the product provides good thermal and low moisture permeability properties

It is environmentally-friendly

Foam Tape is flexible durable

Lightweight for an efficient installation

Item#:
44313
Manufacturer Item:
800-EL-018
You must be logged in to order this item. Log in here
2" x 30', 1/8" Thick, Black, Cork, Soft, Pliable, Insulation Tape

Cork Tape is flexible, durable

Lightweight for an efficient installation

Stretching should be avoided, edges may be butted or overlapped and seams should be sealed with proper pressure

The product adheres well to most clean, dry surfaces and to itself, making it possible to apply more than one layer without the use of adhesives

Three layers can be achieved by butting the edges together on the first wind

Item#:
44314
Manufacturer Item:
800-TAPE-CORK
You must be logged in to order this item. Log in here
1", Die-Cast Zinc Steel, 1-Hole, EMT Conduit Strap (2 per Card)
Item#:
43010
Manufacturer Item:
85337
You must be logged in to order this item. Log in here
1-5/8" OD, Steel, Cushion Pipe Clamp (10 per Pack)
Item#:
43002
Manufacturer Item:
70436
You must be logged in to order this item. Log in here
1-1/4", Conduit Pipe Hanger with Bolt (100 per Pack)

Supports EMT and Rigid conduit or pipe

Item#:
43003
Manufacturer Item:
70448
You must be logged in to order this item. Log in here
2" IPS, Black, Steel, Clevis, Pipe Hanger

Supports non-insulated, stationary lines, Rigid/IMC Conduit and pipe

Item#:
43000
Manufacturer Item:
70431
You must be logged in to order this item. Log in here
3/8", Malleable/Ductile Iron, Beam C-Clamp with Lock Nut

Used to replace various other clamps as top beam or bottom beam structural steel attachments

Item#:
43001
Manufacturer Item:
70416
You must be logged in to order this item. Log in here
2-3/8 to 3" OD, Adjustable, Clevis, Tubing Pipe Clamp (25 per Pack)
Item#:
43006
Manufacturer Item:
70439
You must be logged in to order this item. Log in here
1-1/8 to 2" OD, Adjustable, Clevis, Tubing Pipe Clamp (100 per Pack)
Item#:
43007
Manufacturer Item:
70440
You must be logged in to order this item. Log in here
|◀ 1 - 36 of 385 ▶|
View: