Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
View:
8" x 11.6", 3/4" MPT x 3/4" MPT, 2.1 Gallon, 16 Gauge Cold Rolled Steel, 150 PSI, Thermal Expansion Tank

These potable water expansion tanks feature a 100% butyl diaphragm and plastic liner to separate the system water from the tanks air pre-charge

The system has a stainless steel sleeve to prevent corrosion, something no other manufacturer offers And the tanks are finished with appliance-quality Painted to help prevent external corrosion

PH tank is comprehensively tested and backed by Flexcon's one-year limited warranty

You must be logged in to order this item. Log in here
11" x 14.5", 3/4" MPT, 4.8 Gallon, 150 PSI, 16 Gauge Cold Rolled Steel, Potable Water, Thermal Expansion Tank

These potable water expansion tanks feature a 100% butyl diaphragm and plastic liner to separate the system water from the tanks air precharge

The system has a stainless steel sleeve to prevent corrosion, something no other manufacturer offers. and, the tanks are finished with appliance-quality paint to help prevent external corrosion

On top of all of this, every PH tank is comprehensively tested and backed by Flexcon's one-year limited warranty

Item#:
62930
Manufacturer Item:
PH12
You must be logged in to order this item. Log in here
Galvanized Steel, 90D, Outside Corner for Low Profile Hydronic Baseboard Radiation

Use to trim corners at projecting wall

Telescopic up to 1" on each wall

Item#:
61655
Manufacturer Item:
KOC-90
You must be logged in to order this item. Log in here
5-1/2", Galvanized Steel, Right, Hinged, End Cap for Low Profile Hydronic Baseboard Radiation

Makes removal of front panel easier

Fits flush to the floor

Fully telescopic

Item#:
61650
Manufacturer Item:
KHC-R
You must be logged in to order this item. Log in here
1-Piece, 90D, Snap-On, Inside Corner for Panel Track Hydronic Baseboard

for easy installation

Item#:
61651
Manufacturer Item:
KIC-90
You must be logged in to order this item. Log in here
5-1/2", Galvanized Steel, Left, Hinged, End Cap for Low Profile Hydronic Baseboard Radiation

Makes removal of front panel easier

Fits flush to the floor

Fully telescopic

Item#:
61647
Manufacturer Item:
KHC-L
You must be logged in to order this item. Log in here
3", Left, End Cap for Panel Track Hydronic Baseboard
Item#:
61643
Manufacturer Item:
KCC-L
You must be logged in to order this item. Log in here
3", Right, End Cap for Panel Track Hydronic Baseboard
Item#:
61645
Manufacturer Item:
KCC-R
You must be logged in to order this item. Log in here
3", White, Left, Wall Joiner for Base Board

Made in USA

Item#:
61665
Manufacturer Item:
KWJ-3
You must be logged in to order this item. Log in here
Galvanized Steel, 45D, Inside Corner for Low Profile Hydronic Baseboard Radiation

One piece snap-on for easy installation

Telescopic up to 2-1/2" on each wall

Item#:
61662
Manufacturer Item:
KIC-45
You must be logged in to order this item. Log in here
21" x 36.2", 1-1/4" FPT, 44 Gallon, 100 PSI, 16 Gauge Cold Rolled Steel, Floor Mount, Hydronic Expansion Tank

Constructed of the highest quality steel, the HTX and SXHT are true work horses

HTX comes standard with a 100% butyl diaphragm

SXHT goes even one step further with our patented CAD2 diaphragm, offering even lower permeability rates at higher temperatures

Additionally, both tank lines diaphragms are oversized, which maximizes drawdown and minimizes wear

This design feature virtually eliminates diaphragm stretch, further promoting longevity

Item#:
65121
Manufacturer Item:
SXHT90
You must be logged in to order this item. Log in here
16" x 21.7", 1" FPT, 15 Gallon, 100 PSI, 16 Gauge Cold Rolled Steel, Floor Mount, Hydronic Expansion Tank

Constructed of the highest quality steel, the HTX and SXHT are true work horses

HTX comes standard with a 100% butyl diaphragm

SXHT goes even one step further with our patented CAD2 diaphragm, offering even lower permeability rates at higher temperatures

Additionally, both tank lines diaphragms are oversized, which maximizes drawdown and minimizes wear

This design feature virtually eliminates diaphragm stretch, further promoting longevity

Item#:
65119
Manufacturer Item:
SXHT30
You must be logged in to order this item. Log in here
16" x 42.8", 1" FPT x 1" FPT, 33 Gallon, 16 Gauge Cold Rolled Steel, 100 PSI, Hydronic Expansion Tank

A pre-charged air chamber allows for system water expansion

The air charge is controlled via a charging valve located on the top or bottom of the tank

SXHT goes even one step further with our patented CAD2 diaphragm, offering even lower permeability rates at higher temperature

Additionally, both tank lines' diaphragms are oversized, which maximizes drawdown and minimizes wear

This design feature virtually eliminates diaphragm stretch, further promoting longevity

You must be logged in to order this item. Log in here
3", White, Right, Wall Joiner for Base Board

Made in USA

Item#:
61768
Manufacturer Item:
KWJ-3R
You must be logged in to order this item. Log in here
2", Galvanized Steel, 3-Piece, Snap On Top, Front and Damper Joiner, Splicer Set for Low Profile Hydronic Baseboard Radiation

Joins adjacent baseboard panels

Comes with damper joiner

Item#:
61769
Manufacturer Item:
KSP
You must be logged in to order this item. Log in here
16" x 20.8", 3/4" MPT x 3/4" MPT, 15 Gallon, 16 Gauge Cold Rolled Steel, 100 PSI, Hydronic Expansion Tank

A pre-charged air chamber allows for system water expansion

The air charge is controlled via a charging valve located on the top or bottom of the tank

Additionally, both tank lines' diaphragms are oversized, which maximizes drawdown and minimizes wear

This design feature virtually eliminates diaphragm stretch, further promoting longevity

You must be logged in to order this item. Log in here
11.4" x 17.2", 1/2" MPT x 1/2" MPT, 6 Gallon, 16 Gauge Cold Rolled Steel, 100 PSI, Hydronic Expansion Tank

A pre-charged air chamber allows for system water expansion

The air charge is controlled via a charging valve located on the top or bottom of the tank

Additionally, both tank lines' diaphragms are oversized, which maximizes drawdown and minimizes wear

This design feature virtually eliminates diaphragm stretch, further promoting longevity

You must be logged in to order this item. Log in here
11" x 14", 1/2" MPT x 1/2" MPT, 4.5 Gallon, 16 Gauge Cold Rolled Steel, 100 PSI, Hydronic Expansion Tank

A pre-charged air chamber allows for system water expansion

The air charge is controlled via a charging valve located on the top or bottom of the tank

Additionally, both tank lines' diaphragms are oversized, which maximizes drawdown and minimizes wear

This design feature virtually eliminates diaphragm stretch, further promoting longevity

You must be logged in to order this item. Log in here
8" x 12.5", 1/2" MPT x 1/2" MPT, 2.1 Gallon, 16 Gauge Cold Rolled Steel, 100 PSI, Hydronic Expansion Tank

A pre-charged air chamber allows for system water expansion

The air charge is controlled via a charging valve located on the top or bottom of the tank

Additionally, both tank lines' diaphragms are oversized, which maximizes drawdown and minimizes wear

This design feature virtually eliminates diaphragm stretch, further promoting longevity

You must be logged in to order this item. Log in here
4800 BTU/Hr, 1/2" Copper Tube, 110 to 120 VAC 60 Hz 1-Phase, 103 CFM, Small, Versatile and Powerful, Compact Hydronic Heater

The Ultimate Compact Space Heater-Our Hide-A-Vector3 provides more heat in less space while offering enhanced features, including a two-speed fan control, a small footprint and a totally enclosed housing

All of these make Hide-A-Vector3 the ideal choice when space prohibits the installation of traditional baseboard

Choose the Model that Best Meets Your Needs

Two Speed Control for Added Flexibility- With its choice of low and high speeds, Hide-A-Vector3 offers flexibility in selecting your comfort level Choose either the quieter low speed or the full output high speed

A typical bathroom can be heated using the low speed setting on the model 48

Enclosed Housing Adds Protection-Hide-A-Vector3 has a new, totally enclosed housing of thick galvanized steel, which protects its components during installation and operation

This rugged housing also helps to reduce noise

Implied Economical Installation- Each Hide-A-Vector3 is shipped ready for easy installation

Just connect the 1/2" copper supply inlet and the return outlet to the hot water heating system and then connect the wires from the factory-supplied junction box to normal 120 volt household wiring That's all it takes, fast and easy

Install It Virtually Anywhere- With its sleek, Self-contained housing and small footprint the Hide-A-Vector3 is ideal for installation under kitchen cabinets, beneath bathroom vanities, in stair risers, in front of sliding glass doors or even bookcases. Hide-A-Vector3's ease of installation also makes it the ideal choice to heat finished basements, attic room additions, entranceways, mud rooms, workshops and laundry rooms

Fully Automatic Operation- A thermostatically controlled motor starts the blower as soon as hot water begins  owing through the Hide-A-Vector3 heating coil

As an integral part of the central hot water system, Hide-A-Vector3 can either be piped as part of a baseboard circuit or zoned individually

Item#:
65318
Manufacturer Item:
HAV-88-3
You must be logged in to order this item. Log in here
4800 BTU/Hr, 1/2" Copper Tube, 110 to 120 VAC 60 Hz 1-Phase, 53 CFM, Small, Versatile and Powerful, Compact Hydronic Heater

The Ultimate Compact Space Heater-Our Hide-A-Vector3 provides more heat in less space while offering enhanced features, including a two-speed fan control, a small footprint and a totally enclosed housing

All of these make Hide-A-Vector3 the ideal choice when space prohibits the installation of traditional baseboard

Choose the Model that Best Meets Your Needs

Two Speed Control for Added Flexibility- With its choice of low and high speeds, Hide-A-Vector3 offers flexibility in selecting your comfort level Choose either the quieter low speed or the full output high speed

A typical bathroom can be heated using the low speed setting on the model 48

Enclosed Housing Adds Protection-Hide-A-Vector3 has a new, totally enclosed housing of thick galvanized steel, which protects its components during installation and operation

This rugged housing also helps to reduce noise

Implied Economical Installation- Each Hide-A-Vector3 is shipped ready for easy installation

Just connect the 1/2" copper supply inlet and the return outlet to the hot water heating system and then connect the wires from the factory-supplied junction box to normal 120 volt household wiring That's all it takes, fast and easy

Install It Virtually Anywhere- With its sleek, Self-contained housing and small footprint the Hide-A-Vector3 is ideal for installation under kitchen cabinets, beneath bathroom vanities, in stair risers, in front of sliding glass doors or even bookcases. Hide-A-Vector3's ease of installation also makes it the ideal choice to heat finished basements, attic room additions, entranceways, mud rooms, workshops and laundry rooms

Fully Automatic Operation- A thermostatically controlled motor starts the blower as soon as hot water begins  owing through the Hide-A-Vector3 heating coil

As an integral part of the central hot water system, Hide-A-Vector3 can either be piped as part of a baseboard circuit or zoned individually

Item#:
65317
Manufacturer Item:
HAV-48-3
You must be logged in to order this item. Log in here
1/2", MPT, 125 PSIG, Brass, Charger for Air Vent
Item#:
65335
Manufacturer Item:
113041
You must be logged in to order this item. Log in here
1/2" x 3/4", MPT x MPT, 9" Diameter, Cast Iron, Tank Fitting
Item#:
65349
Manufacturer Item:
112008
You must be logged in to order this item. Log in here
1/2" MPT Tank and 3/4" FPT Boiler, 175 PSIG, Airtrol Tank Fitting
You must be logged in to order this item. Log in here
3-1/2" Square Dial, 1/4" NPT Rear, 0 to 75 PSI, 60 to 260 Deg F, Black Epoxy Coated Steel Case, Tri-O-Meter

The Weiss Tri-O-Meter is Designed for Use on All Types of Hot Water Heating Systems

One Instrument Reads the Water Pressure, Water Temperature and System Head in Feet of H2O

Bold Markings and Colors on a White Dial Ensure Easy Readability and a Good Looking Addition to any Installation

Item#:
81340
Manufacturer Item:
CTP40RSX
You must be logged in to order this item. Log in here
3.64" x 3.64", 1/2" NPT Rear, 3-1/2" Square Dial, 0 to 200 PSI, Black Epoxy Coated Steel Case, Brass Connection, Tri-O-Meter

The Weiss TRI-O-METER is designed for use on all types of hot water heating systems

One instrument indicates water pressure, water temperature and system head in Foot of water

Bold markings and colors on a white dial ensure easy readability and a good looking addition to any installation

Item#:
81341
Manufacturer Item:
HTP40RSX
You must be logged in to order this item. Log in here
2.71", 1/4" NPT Rear, 2-1/2" Round Dial, 0 to 75 PSI, Black Epoxy Coated Steel Case, Brass Connection, Tri-O-Meter

The Weiss TRI-O-METER is designed for use on all types of hot water heating systems

One instrument indicates water pressure, water temperature and system head in Foot of water

Bold markings and colors on a white dial ensure easy readability and a good looking addition to any installation

Item#:
81324
Manufacturer Item:
CTP25RX
You must be logged in to order this item. Log in here
2-1/2" and 3-1/2" Dial, 1/4" NPT, 0 to 75 PSI, Lower or Rear Connection, Dial Display, Black Epoxy Coated Steel with Glass Window, TRI-O-METER

Bold Markings and Colors on a White Dial Ensure Easy Readability and a Good Looking Addition to any Installation

Item#:
81327
Manufacturer Item:
CTP25R
You must be logged in to order this item. Log in here
3-1/2" Square Dial, 1/2" NPT Lower, 0 to 75 PSI, 60 to 260 Deg F, Black Epoxy Coated Steel Case, Tri-O-Meter

The Weiss Tri-O-Meter is Designed for Use on All Types of Hot Water Heating Systems

One Instrument Reads the Water Pressure, Water Temperature and System Head in Feet of H2O

Bold Markings and Colors on a White Dial Ensure Easy Readability and a Good Looking Addition to any Installation

Item#:
81339
Manufacturer Item:
CTP40L
You must be logged in to order this item. Log in here
3.64" x 3.64", 1/2" NPT Lower, 3-1/2" Square Dial, 0 to 200 PSI, Black Epoxy Coated Steel Case, Brass Connection, Tri-O-Meter

The Weiss TRI-O-METER is designed for use on all types of hot water heating systems

One instrument indicates water pressure, water temperature and system head in Foot of water

Bold markings and colors on a white dial ensure easy readability and a good looking addition to any installation

Item#:
81338
Manufacturer Item:
HTP40L
You must be logged in to order this item. Log in here
1/4" MPT, 0 to 30 PSI, White with Black, Metal Dial Display, Stainless Steel, Stem/Surface Mount, Standard, Pressure Gauge

Push-In Lexan Window

All Brass Construction, Precision Gear and Pinion Movement

Item#:
81312
Manufacturer Item:
4CTS-030
You must be logged in to order this item. Log in here
1/4" MPT, 0 to 100 PSI, White with Black, Metal Dial Display, Stainless Steel, Stem/Surface Mount, Standard, Pressure Gauge

Push-In Lexan Window

All Brass Construction, Precision Gear and Pinion Movement

Item#:
81314
Manufacturer Item:
4CTS-100
You must be logged in to order this item. Log in here
View: