S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Pipe diameters are the same as iron pipe ("IPS" = "Iron Pipe Size")
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Pipe diameters are the same as iron pipe . ("IPS" = "Iron Pipe Size")
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Inserts into fitting hub to reduce to smaller pipe size
Solvent weld joints
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Pipe diameters are the same as iron pipe . ("IPS" = "Iron Pipe Size")
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Pipe diameters are the same as iron pipe . ("IPS" = "Iron Pipe Size")
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Pipe diameters are the same as iron pipe ("IPS" = "Iron Pipe Size")
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Used to reduce or increase pipe size
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping material
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating The pressure rating for Schedule pipe decreases as the diameter increases
Pipe diameters are the same as iron pipe ("IPS" = "Iron Pipe Size")
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Adapts pressure pipe to standard male pipe threads PTFE thread tape is recommended for threaded joints
Solvent weld joints
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Pipe diameters are the same as iron pipe ("IPS" = "Iron Pipe Size")
Solvent weld joints
Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
Solvent weld joints
Non-bundled
Made in USA
Solvent weld joints
Non-bundled
Made in USA
Solvent weld joints
Non-bundled
Made in USA
Flexible rubber couplings are used to connect cast iron, plastic, steel or lead pipe to cast iron, plastic, steel or lead pipe
All models are listed with IAPMO (UPC) 5/16 Inch driver required to tighten bolts
All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity
Stainless Steel Clamps and 5/16 Inch hex head bolts are made from Type 300 Stainless Steel
All models are listed with I.A.P.M.O. (U.P.C.) 5/16 inch driver required to tighten bolts
All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity®
All models are listed with I.A.P.M.O. (U.P.C.) 5/16 inch driver required to tighten bolts
All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity®
Used to reduce or increase pipe size
Solvent weld joints
Solvent welding vinyl pipe and fittings is a permanent process to eliminate costly errors, Genova pipe features a plumb line as a reference mark relative to the degree marks on Genova fitting
Permitted under the International Plumbing Code (IPC) and International Residential Code (IRC)
Solvent weld joints
All major model plumbing codes permit Sch. 40 PVC (meets ASTM D 2665 or F 891). International Plumbing Code (IPC) and International Residential Code (IRC) permit DR-24 pipe (meets ASTM F1488)
Solvent welding vinyl pipe and fittings is a permanent process. To eliminate costly errors, Genova pipe features a plumb line as a reference mark relative to the degree marks on Genova fittings
Used to change direction in piping Sometimes called a Sixteenth Bend
Solvent weld joints
Solvent welding vinyl pipe and fittings is a permanent process
To eliminate costly errors, Genova pipe features a plumb line as a reference mark relative to the degree marks on Genova fitting
Used to change direction in piping. Adapts to standard female pipe threads
PTFE thread tape is recommended for threaded joints
Used to change direction in piping Adapts to standard female pipe threads
PTFE thread tape is recommended for threaded joints
Solvent weld joints
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases
Adapts pressure pipe to standard male pipe threads PTFE thread tape is recommended for threaded joints
Solvent weld joints
Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating
The pressure rating for Schedule pipe decreases as the diameter increases