Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
|◀ 1 - 36 of 158 ▶|
View:
Item#:
65710
Manufacturer Item:
172739
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
Item#:
65707
Manufacturer Item:
172732
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
Item#:
65282
Manufacturer Item:
0015E3-F4
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
120 VAC 60 Hz 1-Phase, 44 W, 16 GPM, 125 PSI, 4830 RPM, Cast Iron, High Efficiency, Water Circulator

Equipped with a cast iron casing and should be used for closed loop systems only

Taco circulator pumps are for indoor use only

Acceptable for use with water or maximum of 50% water/glycol solution

Item#:
65508
Manufacturer Item:
007E-F4
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
3/4 to 1-1/2", Flanged x Flanged, 115 VAC 60 Hz 1-Phase 0.85 A, 1/20 HP, 0 to 18 GPM, 0 to 17' Discharge Head, 3250 RPM, 125 PSI, Lead-Free, Cast Iron, 3-Speed, Cartridge Circulator Pump

All 00 3-speeds include our replaceable cartridge design and an Integral Flow Check (IFC®) which prevents gravity flow, reduces installation costs and improves system performance

The stainless steel 00 3-Speeds are NSF-372 listed for low lead compliance

Lead-Free

Item#:
65502
Manufacturer Item:
0015-MSF3-IFC
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
3/4" or 1" or 1-1/4" or 1-1/2", Flanged x Flanged, 1/6 HP, 115 VAC 60 Hz 1-Phase 2.15 A, 3250 RPM, 125 PSI, 30 GPM, Lead-Free, Cast Iron, 3-Speed, Cartridge Circulator Pump

Fine Tune to System Requirements

Removable High Flow Integral Flow Check - Prevents Gravity Flow, Reduces Installation Costs, Improves Pump Performance

Replaceable Cartridge Design

Quiet, Efficient Operation

Self-Lubricating

Lead-Free

Item#:
65133
Manufacturer Item:
0013-MSF1-IFC
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
8-1/8" W, 45 GPM, 125 PSI, Cast Iron/Stainless Steel, Non-Metallic Impeller, Cartridge Circulator

Fine tune to system requirements

Highest performance and starting torque in class

heavy duty construction for longer life

Removable high-flow Integral Flow Check (IFC® ), Prevents gravity flow, Reduces installation costs, Improves pump performance

Replaceable cartridge design

Quiet, efficient operation

Self-lubricating, no mechanical seal

Wide range of applications

Item#:
65132
Manufacturer Item:
0012-MSF1-IFC
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
115 VAC 1-Phase, 1.1 A, 125 W, 2950 RPM, 150 PSI, Lead-Free, Maintenance-Free, In-Line, Circulator Pump

A series of in-line wet rotor circulation pumps designed specifically for quiet operation in open (potable) water systems

These pumps have 100% lead-free bronze bodies

Flanged, union and sweat models are available

Automatic Timer and Aquastat accessories

Lead-Free

Item#:
61938
Manufacturer Item:
103418LF
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
6-3/8" W, 120 VAC 60 Hz, 0.54 A, 16 GPM, 125 PSI, Cast Iron, Electronically Commutated Motor, Variable Speed, Circulator
Item#:
61595
Manufacturer Item:
VR1816-HY1-FC2A00
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
3/4" or 1" or 1-1/4" or 1-1/2", Flanged x Flanged, 1/8 HP, 115 VAC 60 Hz 1-Phase 1.1 A, 3250 RPM, 150 PSI, 32 GPM, Lead-Free, Cast Iron, Compact, Direct Drive, Cartridge Circulator Pump

Standard High Capacity Output -Compact Design

Quiet, Efficient Operation

Direct Drive - Low Power Consumption

Unique Replaceable Cartridge Design

Self-Lubricating

Unmatched Reliability Maintenance-Free

Lead-Free

Item#:
61594
Manufacturer Item:
0010-F3
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
3/4" or 1" or 1-1/4" or 1-1/2" Suction, 3/4" or 1" or 1-1/4" or 1-1/2" Discharge, Flanged x Flanged, 125 W, 115 VAC 60 Hz 1-Phase 1.2 A, 2950 RPM, 150 PSI, Noryl Impeller, Cast Iron Casing, 3-Speed, In-Line, Wet Rotor, Horizontal, Circulating Pump

High Starting Torque for Dependable Seasonal Start-Up

Unique B and G DuraGlide Bearing System Assures Years of Trouble-Free Start-Up

DuraGlide Bearing System Incorporates Several Components Working Together to Eliminate Seasonal Freeze-Up

Self-Cleaning Particle Shield Protects Shaft and Bearings from System Start-Up Debris

1-Piece, High Nickel Stainless Steel Stator can Isolates the Stator from System Fluid and Maintains Precision Bearing Alignment for Longer Bearing Life

Carbon Bearings, Diamond like Ceramic Shaft and Generous Clearances are More Resistant to Lime, Chloride and Oxide Build-Up

Face Plate and Rotor Sleeve Feature Corrosion Resistant Stainless Steel Construction for Longer Life

Reliable, Maintenance-Free, Whisper Quiet Wet Rotor Circulators Designed for Residential and Light Commercial Heating Systems

Item#:
61542
Manufacturer Item:
103417
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
15/26" Suction/Discharge, 115 VAC 60 Hz 1-Phase, 0.75 A, 0.263 HP, 145 PSI, Stainless Steel, 2-Pole, 3-Speed, Circulator Pump

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid

Item#:
66713
Manufacturer Item:
98961763
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
115 VAC 60 Hz 1-Phase, 1/8 HP, 30 GPM, 150 PSI, 3250 RPM, Lead-Free, Water Circulator Pump with Integral Flow Check

Integral Flow Check-Prevents gravity flow, Eliminates separate in-line flow check

Reduces installed cost, easy to service

Improved performance versus In-line flow checks

Unique replaceable cartridge-Field serviceable

Unmatched reliability-Maintenance-free

Quiet, efficient operation

Direct drive-Low power consumption

Self-lubricating, No mechanical seal

Standard high capacity output-Compact design

Wide range of applications

Lead-Free

Item#:
65498
Manufacturer Item:
0011-F4-2-IFC
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
15/26" Suction/Discharge, 115 VAC 60 Hz 1-Phase, 0.75 A, 0.117 HP, 145 PSI, Cast Iron, 2-Pole, 3-Speed, Circular Pump

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid

Item#:
66308
Manufacturer Item:
59896341
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
3/4" Suction/Discharge, 115 VAC 1-Phase, 0.23 A, 0.034 HP, 145 PSI, 2-Pole, Hot Water Recirculation Pump

Quick and easy installation

Whisper quiet operation

Built-in timer, line-cord and aquastat

Item#:
66305
Manufacturer Item:
595916
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
1/2" MPT, Comfort Valve for UP Circulator Pump
Item#:
66304
Manufacturer Item:
595926
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
40/43" Suction/Discharge, 115 VAC 60 Hz 1-Phase, 1.8 A, 0.273 HP, 145 PSI, Lead-Free, Cast Iron, 3-Speed, Circular Pump

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid

Lead-Free

Item#:
66318
Manufacturer Item:
52722514
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
15/26" Suction/Discharge, 115 VAC 60 Hz 1-Phase, 0.75 A, 0.265 HP, 145 PSI, Cast Iron, 2-Pole, 3-Speed, Circular Pump

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid

Item#:
66317
Manufacturer Item:
52722512
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
3/4 to 1-1/2", Flanged x Flanged, 115 VAC 60 Hz 1-Phase 0.74 A, 1/25 HP, 0 to 23 GPM, 0 to 10' Discharge Head, 3250 RPM, 125 PSI, Lead-Free, Cast Iron, In-Line, Wet Rotor, Compact Direct Drive, 1-Stage, Cartridge Circulator Pump

The Taco 007 is a cartridge style, Maintenance free, wet-rotor, in-line, single stage circulator pump

It is designed for quiet operation in Hydronic heating, Radiant heating, Hydro-Air fan coils, Indirect water heaters, Chilled fresh water and Domestic Water Recirculation systems

Quiet, Efficient Operation

Unique Replaceable Cartridge Design-Field Serviceable

Self-Lubricating

Unmatched Reliability-Maintenance Free

Lead-Free

Item#:
61821
Manufacturer Item:
007-F5
Manufacturer:
TACO R C SALES&SERVICE
You must be logged in to order this item. Log in here
40/43" Suction/Discharge, 230 VAC 60 Hz 1-Phase, 1.7 A, 0.497 HP, 145 PSI, Cast Iron, 2-Pole, 3-Speed, Circular Pump

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid

Item#:
66626
Manufacturer Item:
95906637
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
115 VAC 60 Hz 1-Split Phase, 4.6 A, 1/4 HP, Open Drip-Proof, Hot Water Circulating Pump

Painted Red To Indicate Hot-Water Usage

40 Deg C Ambient

Reversible Rotation

Resilient Hub Rings

Special Balance For Quit Operation

Class B Insulation

1725 RPM

Automatic Reset Thermal Overload Protector

Sleeve Bearings Have All Angle Thrust System

Units Match OEM performance And Mechanical Features

Sleeve Bearings Unless Noted

Item#:
65379
Manufacturer Item:
3259
Manufacturer:
NIDEC MOTOR CORP.
You must be logged in to order this item. Log in here
1" or 1-1/4" or 1-1/2" Suction, 1" or 1-1/4" or 1-1/2" Discharge, Flanged x Flanged, 1/6 HP, 115 VAC 60 Hz 1-Phase 1.9 A, 1725 RPM, 125 PSI, Centrifugal Phenolic Impeller, Cast Iron Casing, 3-Piece, In-Line, Horizontal, Circulating Booster Pump

B and G Motor is the Heart of the Booster

The Finest Circulator Motor Available

Sleeve Bearing, Oil Lubricated with Replaceable Resilient Motor Mounts

Noise Dampening Coupler

B and G Own Flexible Spring Design Adds to Quiet Operation

Long Bronze Sleeve Bearings Maintain Exact Shaft Alignment

Provides for Constant Circulation of Oil Over Bearing Surfaces

Precision Ground Pump Shaft is Oversized to Provide Large Bearing Surfaces

Hardened Integral Thrust Collar Minimizes End-Thrust to Ensure Long Seal and Bearing Life

The B and G Mechanical Seal is Designed to Withstand the Wide Range of Water Temperatures, Pressures, Additives and Dissolved Solids Common in Hydronic Systems

Centrifugal Impeller Prevents Accumulation of Air at Seal Faces to Assure Long Life

Close Impeller/Body Tolerances Minimize Water Slippage and Maximize Efficiency

Item#:
65369
Manufacturer Item:
102210
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
2" Suction, 2" Discharge, Flanged x Flanged, 1/6 HP, 115 VAC 60 Hz 1-Phase 1.9 A, 1725 RPM, 125 PSI, Centrifugal Phenolic Impeller, Cast Iron Casing, 3-Piece, In-Line, Horizontal, Circulating Booster Pump

B and G Motor is the Heart of the Booster

The Finest Circulator Motor Available

Sleeve Bearing, Oil Lubricated with Replaceable Resilient Motor Mounts

Noise Dampening Coupler

B and G Own Flexible Spring Design Adds to Quiet Operation

Long Bronze Sleeve Bearings Maintain Exact Shaft Alignment

Provides for Constant Circulation of Oil Over Bearing Surfaces

Precision Ground Pump Shaft is Oversized to Provide Large Bearing Surfaces

Hardened Integral Thrust Collar Minimizes End-Thrust to Ensure Long Seal and Bearing Life

The B and G Mechanical Seal is Designed to Withstand the Wide Range of Water Temperatures, Pressures, Additives and Dissolved Solids Common in Hydronic Systems

Centrifugal Impeller Prevents Accumulation of Air at Seal Faces to Assure Long Life

Close Impeller/Body Tolerances Minimize Water Slippage and Maximize Efficiency

Item#:
65366
Manufacturer Item:
102214
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
3/4" or 1" or 1-1/4" or 1-1/2" x 3/4" or 1" or 1-1/4" or 1-1/2", Flanged x Flanged, 125 W, 115 VAC 60 Hz 1-Phase 1.1 A, 2950 RPM, 150 PSIG, 0 to 37 GPM, Cast Iron, In-Line, Low Head, Circulator Pump

Circulating Pump Designed Specifically for Quiet Operation in Closed Loop Systems

Maintenance-Free

Compact Design

Item#:
65364
Manufacturer Item:
106507
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
3/4" or 1" or 1-1/4" or 1-1/2" Suction, 3/4" or 1" or 1-1/4" or 1-1/2" Discharge, Flanged x Flanged, 1/12 HP, 115 VAC 60 Hz 1-Phase 1.75 A, 1725 RPM, 125 PSI, Centrifugal Polypropylene Impeller, Cast Iron Casing, 3-Piece, In-Line, Horizontal, Circulating Booster Pump

B and G Motor is the Heart of the Booster

The Finest Circulator Motor Available

Sleeve Bearing, Oil Lubricated with Replaceable Resilient Motor Mounts

Noise Dampening Coupler

B and G Own Flexible Spring Design Adds to Quiet Operation

Long Bronze Sleeve Bearings Maintain Exact Shaft Alignment

Provides for Constant Circulation of Oil Over Bearing Surfaces

Precision Ground Pump Shaft is Oversized to Provide Large Bearing Surfaces

Hardened Integral Thrust Collar Minimizes End-Thrust to Ensure Long Seal and Bearing Life

The B and G Mechanical Seal is Designed to Withstand the Wide Range of Water Temperatures, Pressures, Additives and Dissolved Solids Common in Hydronic Systems

Centrifugal Impeller Prevents Accumulation of Air at Seal Faces to Assure Long Life

Close Impeller/Body Tolerances Minimize Water Slippage and Maximize Efficiency

Item#:
65363
Manufacturer Item:
106189
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
115 VAC 60 Hz 1-Split Phase, 3.8 A, 1/6 HP, Open Drip-Proof, Hot Water Circulating Pump

Painted Red To Indicate Hot-Water Usage

40 Deg C Ambient

Reversible Rotation

Resilient Hub Rings

Special Balance For Quit Operation

Class B Insulation

1725 RPM

Automatic Reset Thermal Overload Protector

Sleeve Bearings Have All Angle Thrust System

Units Match OEM performance And Mechanical Features

Sleeve Bearings Unless Noted

Item#:
65358
Manufacturer Item:
3257
Manufacturer:
NIDEC MOTOR CORP.
You must be logged in to order this item. Log in here
115 VAC 60 Hz 1-Split Phase, 3.8 A, 1/6 HP, Open Drip-Proof, Hot Water Circulating Pump

Painted Red To Indicate Hot-Water Usage

40 Deg C Ambient

Reversible Rotation

Resilient Hub Rings

Special Balance For Quit Operation

Class B Insulation

1725 RPM

Automatic Reset Thermal Overload Protector

Sleeve Bearings Have All Angle Thrust System

Units Match OEM performance And Mechanical Features

Sleeve Bearings Unless Noted

Item#:
65354
Manufacturer Item:
3256
Manufacturer:
NIDEC MOTOR CORP.
You must be logged in to order this item. Log in here
3/4" or 1" or 1-1/4" or 1-1/2" Suction, 3/4" or 1" or 1-1/4" or 1-1/2" Discharge, Flanged x Flanged, 1/12 HP, 115 VAC 60 Hz 1-Phase 1.75 A, 1725 RPM, 125 PSI, Lead-Free, Centrifugal Brass Impeller, Bronze Casing, 3-Piece, In-Line, Horizontal, Circulating Booster Pump

B and G Motor is the Heart of the Booster

The Finest Circulator Motor Available

Sleeve Bearing, Oil Lubricated with Replaceable Resilient Motor Mounts

Noise Dampening Coupler

B and G Own Flexible Spring Design Adds to Quiet Operation

Long Bronze Sleeve Bearings Maintain Exact Shaft Alignment

Provides for Constant Circulation of Oil Over Bearing Surfaces

Precision Ground Pump Shaft is Oversized to Provide Large Bearing Surfaces

Hardened Integral Thrust Collar Minimizes End-Thrust to Ensure Long Seal and Bearing Life

The B and G Mechanical Seal is Designed to Withstand the Wide Range of Water Temperatures, Pressures, Additives and Dissolved Solids Common in Hydronic Systems

Centrifugal Impeller Prevents Accumulation of Air at Seal Faces to Assure Long Life

Close Impeller/Body Tolerances Minimize Water Slippage and Maximize Efficiency

Lead-Free

Item#:
65362
Manufacturer Item:
106197LF
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
115 VAC 60 Hz 1-Split Phase, 2.5 A, 1/12 HP, Open Drip-Proof, Hot Water Circulating Pump

Painted Red To Indicate Hot-Water Usage

40 Deg C Ambient

Reversible Rotation

Resilient Hub Rings

Special Balance For Quit Operation

Class B Insulation

1725 RPM

Automatic Reset Thermal Overload Protector

Sleeve Bearings Have All Angle Thrust System

Units Match OEM performance And Mechanical Features

Sleeve Bearings Unless Noted

Item#:
65351
Manufacturer Item:
3255
Manufacturer:
NIDEC MOTOR CORP.
You must be logged in to order this item. Log in here
Item#:
7000960
Manufacturer Item:
92603115
You must be logged in to order this item. Log in here
Item#:
7000117
Manufacturer Item:
99412493
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
Item#:
7011582
Manufacturer Item:
92603110
You must be logged in to order this item. Log in here
15/26" Suction/Discharge, 115 VAC 60 Hz 1-Phase, 1.7 A, 0.16 HP, Cast Iron, High-Efficiency, Variable Speed, Circulator Pump

A magnetite-resistant design, robust ceramic shaft and stainless-steel bearing plate ensure that the reliably delivers the optimal system performance throughout the years at the lowest possible energy consumption

Reliability in small domestic circulators to new heights

Ensure long-lasting trouble-free operation with no risk of blockage

Trouble-free heating solution

Versatile and efficient

Item#:
70044
Manufacturer Item:
99490916
Manufacturer:
GRUNDFOS (LTA & HS Buyvan)
You must be logged in to order this item. Log in here
Item#:
7011895
Manufacturer Item:
92603106
You must be logged in to order this item. Log in here
Item#:
83311
Manufacturer Item:
1EF005LF
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
17' Pressure Head, 115 VAC 60 Hz, 1.83 A, 210 W, 45 GPM, 145 PSI, Cast Iron Case, 3-Speed, Hydronic Circulating Pump

Twist-To-Fit Universal Flange, Rotates 90 Degree to Fit Most Installations with a Single Product

Three Pump Sizes Cover Every Application

3-Speed Versatility Maximize Efficiency and Provide Sufficient Flow Rates with a Single Pump

Universal Design Replaces Wide Range of Competitive Models with Just One Brand

Item#:
73863
Manufacturer Item:
PC3F4344IUF00/U
Manufacturer:
RESIDEO-ADEMCO
You must be logged in to order this item. Log in here
|◀ 1 - 36 of 158 ▶|
View: