S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Automatic Fast-filling: Fast fills the system to set pressure then automatically shuts off the water feed. No levers to flip or valves to close
Built-in shut-off valve and check valve: Allows isolation of system from supply and check valve prevents loss of system pressure if the supply water drops below system pressure
Maintains stable pressure at pre-setting: Fill the system to a set pressure and maintain that pressure setting regardless of inlet pressure variations
Pre-calibration: Before charging the system, use a screwdriver to turn dial to intended system pressure. Downstream pressure gauge is not required
Anti-scale polymer materials: Prevents scaling on internal sliding surfaces, assuring stable pressure control and long operating life
The DISCAL® air separator is used to continuously remove the air contained in hydronic circuits of heating and cooling systems
The air discharge capacity is very high
They automatically remove all the air present in the system down to micro-bubble level with low head loss due to the special internal shape of the separator body
Flow direction of the DISCAL air separator is bidirectional
flow in either direction is permitted
The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage
Micro-bubbles, fusing with each other, increase in volume (get larger) until they become large enough to rise to the top where they are automatically released
Lead-Free
Lead-Free
Lead-Free
The DISCAL® air separator is used to continuously remove the air contained in hydronic circuits of heating and cooling systems
The air discharge capacity is very high
They automatically remove all the air present in the system down to micro-bubble level with low head loss due to the special internal shape of the separator body
Flow direction of the DISCAL air separator is bidirectional
flow in either direction is permitted
The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage
Micro-bubbles, fusing with each other, increase in volume (get larger) until they become large enough to rise to the top where they are automatically released
The DISCAL® air separator is used to continuously remove the air contained in hydronic circuits of heating and cooling systems
The air discharge capacity is very high
They automatically remove all the air present in the system down to micro-bubble level with low head loss due to the special internal shape of the separator body
Flow direction of the DISCAL air separator is bidirectional
flow in either direction is permitted
The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage
Micro-bubbles, fusing with each other, increase in volume (get larger) until they become large enough to rise to the top where they are automatically released
In Heating and Air Conditioning Control Systems, the Circulation of Water Containing Impurities May Result in Rapid Wear and Damage to Components Such as Pumps and Control Valves
It also Causes Blockages in Heat Exchangers, Heating Elements and Pipes, Resulting in Lower Thermal Efficiency within the System
The DIRTMAG® Magnetic Dirt Separator Removes Both Ferrous and Non-Ferrous Impurities Continuously, Featuring Powerful Removable Magnets that Remove upto 100% of the Ferrous Impurities, Including Magnetite, that can Form in a Hydronic System
The DIRTMAG® has 2-1/2 Times the Removal performance of a Standard Dirt Separator
In Heating and Air Conditioning Control Systems, the Circulation of Water Containing Impurities May Result in Rapid Wear and Damage to Components Such as Pumps and Control Valves
It also Causes Blockages in Heat Exchangers, Heating Elements and Pipes, Resulting in Lower Thermal Efficiency within the System
The DIRTMAG® Magnetic Dirt Separator Removes Both Ferrous and Non-Ferrous Impurities Continuously, Featuring Powerful Removable Magnets that Remove upto 100% of the Ferrous Impurities, Including Magnetite, that can Form in a Hydronic System
The DIRTMAG® has 2-1/2 Times the Removal performance of a Standard Dirt Separator