Furnish and install the Portals Plus Medium Pipe Boot at all points where any projection penetrates the roof system and is less than 6 Inch in diameter

The Medium Pipe Boot shall include 60 mil EPDM or NEOPRENE compression molded body and shall include 70 mil PVC (Polyvinyl Chlo-ride) or TPO (Thermoplastic Olefin) injection molded body

The Medium Pipe Boot shall also include Portals Plus Snaplock Clamp

Whenever necessary utilize Portals Plus Adapters to seal to square tubing and angle iron and for round penetrations less than 1 Inch in diameter

Use white or black as necessary

Attachment of Medium Pipe Boot to roof system shall be done in accordance with Portals Plus Installation Instructions and the roofing membrane manufacturers requirements

Furnish and install Portals Plus Galvanized Shingle Flashings as manufactured by Portals Plus, Inc. at all round penetrations from 1.25" through 4", occurring in shingle roofing systems under 40 Degree slope or as shown on drawings

The Shingle Flashings shall consist of an elastomeric collar integrally locked into a rigid base of 24 gauge galvanized steel

The elastomeric collar shall be resistant to ozone, ultraviolet degradation and temperature extremes

The base shall be rust resistant

Furnish and install Portals Plus Galvanized Shingle Flashings as manufactured by Portals Plus, Inc. at all round penetrations from 1.25" through 4", occurring in shingle roofing systems under 40 Degree slope or as shown on drawings

The Shingle Flashings shall consist of an elastomeric collar integrally locked into a rigid base of 24 gauge galvanized steel

The elastomeric collar shall be resistant to ozone, ultraviolet degradation and temperature extremes

The base shall be rust resistant

Furnish and install Portals Plus Galvanized Shingle Flashings as manufactured by Portals Plus, Inc. at all round penetrations from 1.25" through 4", occurring in shingle roofing systems under 40 Degree slope or as shown on drawings

The Shingle Flashings shall consist of an elastomeric collar integrally locked into a rigid base of 24 gauge galvanized steel

The elastomeric collar shall be resistant to ozone, ultraviolet degradation and temperature extremes

The base shall be rust resistant