ELS150S4DS1-Y 230V 3PH 12.5T CONDENSER 21C33

Outdoor Coil Fans-One Outdoor Fan-ELS072 and ELS090, Two Outdoor Fans-ELS120 and ELS150, Four Outdoor Fans-ELS180 and ELS240, Direct drive fans moves large volumes of air uniformly through entire condenser coil for high refrigerant cooling capacity, Totally enclosed fan motors, Overload protected, Rain shield furnished

Copper Tube/Enhanced Fin Coils, Wrap-around U Shaped Coil-ELS072-090-120 models, Two L Shaped Coils-ELS150-180-240 models, Ripple-edge aluminum fins, Seamless copper tube construction, Lanced fins for maximum fin surface exposure, Fin collars grip tubing for maximum contact area, Flared shoulder tubing connections, Machine brazed silver soldering, Factory tested under high pressure, Completely accessible for cleaning

CC High Pressure Switch-Protects the system from high pressure conditions, Manual reset

Loss of Charge Switch-Shuts off unit if liquid line pressure falls below setting, Provides loss of charge and freeze-up protection

Automatic reset Hi-Capacity Driers-Traps moisture or dirt

Refrigerant Lines and Service Valves-Suction and liquid lines located on corner of unit, Sweat connections, See dimension drawings, Fully serviceable suction and liquid line service valves provide complete service access to refrigerant system, Suction valve can be fully Shut-Off, while liquid valve can be front seated to manage refrigerant charge while servicing system, Accessible outside of unit cabinet

SCROLL COMPRESSORS-One Two-Stage Compressor-ELS072S4S, ELS090S4S and ELS120S4S models, Two-Single-Stage Compressors-ELS120S4D, ELS150S4D, ELS180S4D and ELS240S4D, High efficiency with uniform suction flow, Constant discharge flow, high volumetric efficiency and quiet operation, Low gas pulses during compression reduces operational sound levels, Compressor motor is internally protected from excessive current and temperature, Muffler in discharge line reduces operating sound levels, Compressor is installed in the unit on resilient rubber mounts for vibration free operation

CABINET-Heavy-gauge, pre-painted steel cabinet, Removable panels for unit servicing, Heavy duty steel base rails raise the unit off of mounting surface, Unit lifting holes and forklift slots furnished in base rails, See dimension drawings

Control Box-Control box located in separate compartment in unit cabinet, All controls are pre-wired at the factory, Control box is large enough for field installed DDC or other field supplied control modules