Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
{}
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
MINNIE MOUSE LANE
PORTAGE, IN 46368
*Click to change your account
Switching Accounts
Are you sure you want to switch accounts?
Switching Accounts
Switching accounts in the middle of an order will clear your current cart. Are you sure you want to switch accounts?
Updating Cart
Updating items in your cart...
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
/contenthandler/!ut/p/digest!s6JIKzCLemt0HJbZUG83eQ/pm/oid:--portletwindowid--@oid:Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
/contenthandler/!ut/p/digest!s6JIKzCLemt0HJbZUG83eQ/um/secure/currentuser/profile?expandRefs=true
- Cooling Parts
- Heating Parts Service
- brass fittings-Heating Parts Service
- Commercial Burner Controls
- Control Boards-Heating Parts Service
- Draft Inducers-Heating Parts Service
- electric heat parts
- electrical service
- fan and limit controls
- Flame Sensor
- Flue Collector Box
- Gas Regulators
- Gas Valves
- gaskets
- heat exchangers
- ignition components
- Ignitors
- manifold and burners
- Motors-Heating Parts
- OEM Parts-Heating Parts Service
- pressure switches-Heating Parts Service
- relays-Heating Parts Service
- Specialty Controls
- Specialty-Heating Parts Service
- Thermocouples
- Transformers
- venting materials
- Motor Accessories
- Motors
- Compressors
- Controls/Accessories
- Accumulators and Receivers
- Capacitors-Controls/Accessories
- Capillary Tubing
- Defrost Controls
- Drain Pan / Cable Heaters
- Expansion Valves-Controls/Accessories
- Filter Driers
- Miscellaneous-Controls/Accessories
- Motors-Controls
- Overload
- Pressure Controls
- Refrigeration Valves
- Relays-Controls/Accessories
- Relief valves-Controls
- Sight Glasses and Moisture Indicators-Accessories
- Solenoid Valves
- Temperature Controls
- Vibration Eliminators
- Equipment Refrigeration
- Refrigerant and Oils
- Chemicals
- Chimney and Venting
- Electrical
- Installation
- Adhesives-Installation
- Brazing and Soldering Supplies
- Capacitors-Installation
- Caulk and Sealants
- Condensate Drain Pans
- Condensate Management
- Condensate Pumps
- Drain Tube and Fittings
- Duct and Pipe Hangers
- Duct Connectors and Damper Hardware
- Duct Sealants
- Equipment Pads and Stands
- Hardware, Fasteners, and Hangers
- Hose Clamps
- Markers & Paint
- Miscellaneous-Installation
- Roof Penetration Products
- Tape
- Thread Sealants
- Vibration Absorbers and Pads
- Maintenance
- Pipe, Fittings, and insulation
- Black Pipe & Fittings
- Black Pipe and Fittings Accessories
- Copper Fittings
- Copper Pipe
- Copper Press Fittings
- Flexible Gas Pipe Fittings including Insulation
- Galvanized Pipe and Fittings
- HVACR Brass fittings
- Linesets
- LOKRING
- Pipe Insulation
- Push Fit Fittings
- PVC Pipe and Fittings
- PVC Pipe and Fittings Accessories
- Specialty Supplies
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
CS42DG 100 PAK RIVET
Item #:
47166
Manufacturer Item: CS42DX
Manufacturer:
MALCO PRODUCTS
0.125" x 0.232" Shank, 0.25" x 0.032" Head, Copper, Blind Rivet (100 per Box)
Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration
Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened
Rivets require only a pre-drilled or pre-punched hole
The blind rivet is an assembly, consisting of a mandrel and an eyelet body
Mandrels are used only to set the rivet body and are then discarded
Mandrel is designed to break off at the crimp after pulling (setting) the rivet body
No operator skill is required to set blind rivets
Low rivet profile offers cosmetic advantages over screws
Hardware, Fastners, and Hangers
Material
Copper
Head Diameter
0.25 Inch
Head Thickness
0.032 Inch
Recommended Hole Diameter
0.125 to 0.135 Inch
Shank Diameter
0.125 Inch
Shank Length
0.232 Inch