5 to 1 safety factor (beats industry standard of 4 to 1)

Opens to full flow

Stainless steel thrust washer insures free rotation even under high pressure

Three point contact on depressor

Use P90022 replacement O-ring

Made in USA

CLS Series hoses feature a secure seal fitting that opens to full flow

The revolutionary patent-pending design on our internal structure significantly reduces blowouts, provides maximum flow and automatically traps refrigerant discharge in the hose

The gasket features a hood with a straight edge that snaps into the straight edge of the barb

This straight edge to straight edge force eliminates gasket blowouts

The depressor is barbed and locks into the gasket, meaning the outward force on the depressor pushes the gasket further into place, resulting in no blowouts

JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts

Kobra® high pressure hoses are made from Kevlar® the same material that stops bullets in bullet proof vests

This provides a 5 to 1 safety factor (better than the industry standard of 4 to 1)

Kevlar® makes our hoses incredibly strong and flexible

Kobra® hoses feature a nitrile cover which is better than neoprene because it is more resistant to oil, giving the hoses a longer life

Pressure rating 800 psi and 4,000 psi burst

These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia

Made in USA

CLS Series hoses feature a secure seal fitting that opens to full flow

The revolutionary patent-pending design on our internal structure significantly reduces blowouts, provides maximum flow and automatically traps refrigerant discharge in the hose

The gasket features a hood with a straight edge that snaps into the straight edge of the barb

This straight edge to straight edge force eliminates gasket blowouts

The depressor is barbed and locks into the gasket, meaning the outward force on the depressor pushes the gasket further into place, resulting in no blowouts

JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts

Kobra® high pressure hoses are made from Kevlar® the same material that stops bullets in bullet proof vests

This provides a 5 to 1 safety factor (better than the industry standard of 4 to 1)

Kevlar® makes our hoses incredibly strong and flexible

Kobra® hoses feature a nitrile cover which is better than neoprene because it is more resistant to oil, giving the hoses a longer life

Pressure rating 800 psi and 4,000 psi burst

These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia

Made in USA

Contractor Quality

118 Degree Conventional Point Angle Allows Deep Drilling in a Variety of Materials Including Metal

Lifetime Limited Warranty

A Thicker, More Rigid Blade Body Resists Fracturing and Bending for Maximum Durability

Matrix II Bi-Metal Teeth for Greater Durability

Ordinary Teeth Deliver Either Speed or Durability. Nail Guard Solves this Trade-Off with an Aggressive 5 TPI Pattern for Faster Cuts and a Unique Design that Protects against Tooth Fracture

Ordinary TPIs Bounce or Skate on the Work Piece

Fang Tip Bites into the Wood on First Contact

The 1 Inch Tall Blade Body Reduces Blade Twisting for Straighter, More Accurate Cut

Nail Guard Ordinary Teeth Deliver Either Speed or Durability

Nail Guard  Solves this Trade-Off with an Aggressive 5 TPI Pattern for Faster Cuts and a Unique Design that Protects against Tooth Fracture

A Thicker, More Rigid Blade Body Resists Fracturing and Bending for Maximum Durability

Fang Tip Ordinary TPIs Bounce or Skate on the Work Piece

Fang Tip Bites into the Wood on First Contact

The 1 Inch Tall Blade Body Reduces Blade Twisting for Straighter, More Accurate Cut

A Thicker, More Rigid Blade Body Resists Fracturing and Bending for Maximum Durability

Matrix II Bi-Metal Teeth for Greater Durability

Ordinary Teeth Deliver Either Speed or Durability. Nail Guard Solves this Trade-Off with an Aggressive 5 TPI Pattern for Faster Cuts and a Unique Design that Protects against Tooth Fracture

Ordinary TPIs Bounce or Skate on the Work Piece

Fang Tip Bites into the Wood on First Contact

The 1 Inch Tall Blade Body Reduces Blade Twisting for Straighter, More Accurate Cut

Optimized tooth design providing 2X more life than our previous generation SAWZALL® blades

Tough Neck ribs strengthen the blade tang and minimize breakage

Grid Iron honeycomb pattern increases blade rigidity to resist blade buckling

NAIL GUARD technology cuts 2X faster than standard blades

Matrix II bi-metal teeth for greater durability

Ideal for plunge-cutting into wood and nail-embedded wood

FANG TIP bites into the wood on first contact

The 1 in. tall blade body reduces blade twisting for straighter, more accurate cuts

1/2 in. Universal Tang fits all SAWZALLS

Matrix II bi-metal teeth for greater durability

Ordinary teeth deliver either speed or durability. NAIL GUARD  solves this trade-off with an aggressive 5 TPI pattern for faster cuts and a unique design that protects against tooth fracture

Ordinary tips bounce or skate on the work piece. FANG TIP  bites into the wood on first contact

Double relief angle reduces tooth stress for long life

Precision forming process creates sharper teeth for fast cutting

Matrix II bi-metal teeth for greater durability