Solvent weld joints

Non-bundled

Made in USA

Solvent weld joints

Non-bundled

Made in USA

Pipe diameters are the same as iron pipe . ("IPS" = "Iron Pipe Size")

Solvent weld joints

Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials

Pipe produced to a Standard Dimensional Ration (SDR) has a wall thickness that is proportional to its diameter and all sizes have the same pressure rating

The pressure rating for Schedule pipe decreases as the diameter increases

Used to cap pipe

Caps are designed with dome shaped top

Used to cap pipe

Caps are designed with dome shaped top

Used to cap pipe

Caps are designed with dome shaped top

All models are listed with I.A.P.M.O. (U.P.C.) 5/16 inch driver required to tighten bolts

All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity®

All models are listed with I.A.P.M.O. (U.P.C.) 5/16 inch driver required to tighten bolts

All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity®

Used to reduce or increase pipe size

Solvent weld joints

Solvent welding vinyl pipe and fittings is a permanent process to eliminate costly errors, Genova pipe features a plumb line as a reference mark relative to the degree marks on Genova fitting

Permitted under the International Plumbing Code (IPC) and International Residential Code (IRC)

Solvent weld joints

All major model plumbing codes permit Sch. 40 PVC (meets ASTM D 2665 or F 891). International Plumbing Code (IPC) and International Residential Code (IRC) permit DR-24 pipe (meets ASTM F1488)

Solvent welding vinyl pipe and fittings is a permanent process. To eliminate costly errors, Genova pipe features a plumb line as a reference mark relative to the degree marks on Genova fittings