Undercut-indented hex washer slotted head

Bright Zinc Plated

Burr Free

Undercut  always seats flush

Combination Lead Double Thread Design-Single starting thread machined down to very tip of screw point, Instantly penetrates and engages in heavy gauge sheet metal and layered light gauge

Consistent Hard Point-Quality controlled heat treat, Sharp tapered point will not mushroom or break, No walking

Limited Lifetime Warranty

Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration

Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened

Only require a pre-drilled or punched hole

Low rivet profile offers cosmetic advantages over screws

No operator skill is required to set blind rivets

Limited Lifetime Warranty

No Operator Skill is Required to Set Blind Rivets

Low Rivet Profile Offers Cosmetic Advantages Over Screws

Lifetime Limited Warranty

Made in USA

Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration

Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened

Rivets require only a pre-drilled or pre-punched hole

The blind rivet is an assembly, consisting of a mandrel and an eyelet body

Mandrels are used only to set the rivet body and are then discarded

Mandrel is designed to break off at the crimp after pulling (setting) the rivet body

No operator skill is required to set blind rivets

Low rivet profile offers cosmetic advantages over screws

Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened

Rivets require only a pre-drilled or pre-punched hole

The blind rivet is an assembly, consisting of a mandrel and an eyelet body

Mandrels are used only to set the rivet body and are then discarded

Mandrel is designed to break off at the crimp after pulling (setting) the rivet body

No operator skill is required to set blind rivets

Low rivet profile offers cosmetic advantages over screws

Limited Lifetime Warranty

Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration

Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened

Only require a pre-drilled or punched hole

Low rivet profile offers cosmetic advantages over screws

No operator skill is required to set blind rivets

Limited Lifetime Warranty

Low Rivet Profile Offers Cosmetic Advantages Over Screws

Limited Lifetime Warranty

Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened

Rivets require only a pre-drilled or pre-punched hole

The blind rivet is an assembly, consisting of a mandrel and an eyelet body

Mandrels are used only to set the rivet body and are then discarded

Mandrel is designed to break off at the crimp after pulling (setting) the rivet body

No operator skill is required to set blind rivets

Low rivet profile offers cosmetic advantages over screws

Limited Lifetime Warranty

The Hanger Strap Helps Prevent a Duct System from Sagging Over Long Runs

Easily Installed Using Nails or Screws

Made in USA

Creates a Permanent, Air Tight Seal Through Walls

Temporary Plug Keeps Out Air, Insects and Other Pests

For New Construction or Retrofit

No Ugly Holes to Patch

Flange Pre-Marked for Nails or Screws

Unit Offers Custom, Professional Look

No Snagged Line Sets