Made in USA

Furnish and install the Portals Plus Medium Pipe Boot at all points where any projection penetrates the roof system and is less than 6 Inch in diameter

The Medium Pipe Boot shall include 60 mil EPDM or NEOPRENE compression molded body and shall include 70 mil PVC (Polyvinyl Chlo-ride) or TPO (Thermoplastic Olefin) injection molded body

The Medium Pipe Boot shall also include Portals Plus Snaplock Clamp

Whenever necessary utilize Portals Plus Adapters to seal to square tubing and angle iron and for round penetrations less than 1 Inch in diameter

Use white or black as necessary

Attachment of Medium Pipe Boot to roof system shall be done in accordance with Portals Plus Installation Instructions and the roofing membrane manufacturers requirements

Furnish and install Portals Plus Galvanized Shingle Flashings as manufactured by Portals Plus, Inc. at all round penetrations from 1.25" through 4", occurring in shingle roofing systems under 40 Degree slope or as shown on drawings

The Shingle Flashings shall consist of an elastomeric collar integrally locked into a rigid base of 24 gauge galvanized steel

The elastomeric collar shall be resistant to ozone, ultraviolet degradation and temperature extremes

The base shall be rust resistant

Furnish and install Portals Plus Galvanized Shingle Flashings as manufactured by Portals Plus, Inc. at all round penetrations from 1.25" through 4", occurring in shingle roofing systems under 40 Degree slope or as shown on drawings

The Shingle Flashings shall consist of an elastomeric collar integrally locked into a rigid base of 24 gauge galvanized steel

The elastomeric collar shall be resistant to ozone, ultraviolet degradation and temperature extremes

The base shall be rust resistant

Furnish and install Portals Plus Galvanized Shingle Flashings as manufactured by Portals Plus, Inc. at all round penetrations from 1.25" through 4", occurring in shingle roofing systems under 40 Degree slope or as shown on drawings

The Shingle Flashings shall consist of an elastomeric collar integrally locked into a rigid base of 24 gauge galvanized steel

The elastomeric collar shall be resistant to ozone, ultraviolet degradation and temperature extremes

The base shall be rust resistant

RoHS Compliant

This Filler Metal is Excellent for Situations in Which Close Fit-Up Does Not Exist and Where Thermal Expansion and Service Vibration are Involved

Made in USA

A General Purpose Zinc Chloride Flux for Soldering with All Soft Solders Use with Tin-Lead Solder, Tin-Antimony Solder, Stay-Brite® Solder

Used for Soldering Virtually All Metals Except Aluminum, Magnesium or Titanium

RoHS Compliant

Made in USA

Tough and Durable

Hand Tearable for Ease of Use

UV Resistant for Outdoor Installation

Solvent-Free for Reduced Odor

Aggressive Bond - Won't Flag or Lift

Mold and Moisture Resistant

Low VOC Content

Special Adhesive System with Aggressive Adhesion Even at -35 Deg F

Foil Backing is Extremely Conformable

High Performance Acrylic Adhesive

UV, Moisture and Mold Resistant

Low Odor

High Tack, Aggressive Bond to Surfaces

Excellent Performance in Extreme Cold or Heat

Meets Flammability Requirements for Use in Construction, Aerospace and Marine Applications

Low VOC Content

RoHS Compliant