Adapter to transition from all brands of listed Type B Gas Vent to Flexi-Line

Alternate choice, horizontal or vertical, if no provision for collecting condensate is available at the appliance

For 2 Inch, if needed horizontally, use a Tee with branch pointing down and a Drain Tee Cap (TCD)

Requires 7/8 Inch diameter condensate tube

Adapter to transition from all brands of listed Type B Gas Vent to Flexi-Line

Field cut in 20 Inch or 40 Inch increments, as necessary

Can be used as a single continuous vent system in a multi-story vertical combustible chase at 0 inch clearance

Can be field cut in half, if necessary, to install after pipe installation

Plastic flexible centering spacer used for masonry flex re-line installations at every 7 foot above the base support

Packaged with the FLEX-KIT

Secures around the corrugations in the flexible pipe as the flexible pipe is being dropped down

White UV Resistant

Use with twin pipe to concentric adapter (CTA) for one penetration through the wall for exhaust and air intake

Can be field cut shorter if necessary

Install with a 0.375 Inch/foot (2 deg) upward slope away from appliance

Only one support needed for horizontal concentric terminations

Used to connect Polyflue directly to appliance outlets sized for PVC OD

Field RTV appliance connection as necessary