Plastic flexible centering spacer used for masonry flex re-line installations at every 7 foot above the base support

Packaged with the FLEX-KIT

Secures around the corrugations in the flexible pipe as the flexible pipe is being dropped down

White UV Resistant

Use with twin pipe to concentric adapter (CTA) for one penetration through the wall for exhaust and air intake

Can be field cut shorter if necessary

Install with a 0.375 Inch/foot (2 deg) upward slope away from appliance

Only one support needed for horizontal concentric terminations

Used to connect Polyflue directly to appliance outlets sized for PVC OD

Field RTV appliance connection as necessary

More Versatile

Easier

Quicker

Safer

0 Inch clearance to combustibles

No toxic glues or primers

Simple, easy to install product offering

2 to 4 Inch single-wall rigid and flexible pipe

Environmentally-friendly and fully recyclable

No toxic glues or primers

2 to 4 diameter single-wall rigid and flexible pipe

Viton® Integral Gasket for superior sealing performance

Simple, easy to install product offering

Locking bands can be installed during or after the installation, providing ultimate flexibility

Environmentally-friendly and fully recyclable

Alternate choice, horizontal or vertical, if no provision for collecting condensate is available at the appliance

For 2 Inch if needed horizontally, use a Tee with branch pointing down and a Drain Tee Cap (TCD)

Can be field cut in half, if necessary, to install after pipe installation