Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
|◀ ◀ 193 - 204 of 2750 ▶ ▶|
View:
4 to 7" Pipe, Deck Mate, Flashing System with Stainless Steel Snaplock Clamp

The Deck-Mate flashing incorporates a stepped profile which creates a compression seal between the schedule 40 piping and the flashing

Designed with proper reinforcing ribs to allow the flashing to maintain rigidity and the shape of the product

By combining the stepped profile and the reinforcing ribs the product will properly accommodate the use of a stainless steel clamp The clamp is crucial in maintaining a water tight seal for years to come

All other products on the market incorporate the use of caulk to seal the penetration

The National Roofing Contractor Association states, in their better roofing practices, that caulk should never be used as a primary sealer of a penetration

The Deck-Mates are designed to accommodate projections from .125"-26" in diameter and work in conjunction with any configuration of corrugated metal roof

The product is engineered to incorporate a dead soft aluminum flange that bends to any contour, roof irregularity or pitch

Deck-mate is available in two styles the standard for normal penetration and Retrofit for piping that can not be disconnected

Flashings are also available in two materials, standard EPDM and high temperature Silicone

Furnish and install a tall points where 26" or less pipes penetrate the metal roof and wall system

The Deck-Mate shall be EPDMor Silicone (high temperature) compression molded rubber

Material shall have a serviceable temperature range of -60 F to 270 F for EPDM and -100 F to 500 F for Silicone Both products will be resistant to ozone and ultraviolet

Unit shall have 1" wide corrosion resistant flexible aluminum base The Deck-Mate shall also include Portals Plus' Snaplock Clamp (except DM0)

Item#:
57451
Manufacturer Item:
DM5
Manufacturer:
SELKIRK
You must be logged in to order this item. Log in here
This item has been discontinued
#6 x 3/8", 1/4" Zinc Plated Hex Head, Slotted Drive, Self-Piercing Sheet Metal Screw (100 per Pack)

Undercut-indented hex washer slotted head

Bright Zinc Plated

Burr Free

Undercut  always seats flush

Combination Lead Double Thread Design-Single starting thread machined down to very tip of screw point, Instantly penetrates and engages in heavy gauge sheet metal and layered light gauge

Consistent Hard Point-Quality controlled heat treat, Sharp tapered point will not mushroom or break, No walking

Limited Lifetime Warranty

Item#:
42827
Manufacturer Item:
HW6X3/8Z
Manufacturer:
MALCO PRODUCTS
You must be logged in to order this item. Log in here
This item has been discontinued
Item#:
41518
Manufacturer Item:
1200
Manufacturer:
RESEARCH PRODUCTS CORP
You must be logged in to order this item. Log in here
Item#:
47229
Manufacturer Item:
SS/SS-44-DT
Manufacturer:
MALCO PRODUCTS
You must be logged in to order this item. Log in here
Item#:
47228
Manufacturer Item:
SS/SS-42-DT
Manufacturer:
MALCO PRODUCTS
You must be logged in to order this item. Log in here
0.9 Gallon Can, Wet/Dry Surface, Weather Roof Patch

Stops Roof Leaks Instantly

Long-Lasting Protection

Fiber Reinforced

Easy-To Use-Trowel Grade Formula

Commercial and Residential Use

Item#:
41943
Manufacturer Item:
RM-1G
Manufacturer:
DIVERSITECH CORPORATION
You must be logged in to order this item. Log in here
1/2" Suction, 1/4" Liquid, 15' L, 1/2" Insulation, 700 PSI, C12200 Copper, Mini Split, HVAC Line Set

Made in USA

Item#:
54760
Manufacturer Item:
40820150B3B6C
Manufacturer:
MUELLER INDUST-LINE SETS
You must be logged in to order this item. Log in here
5/8" Suction, 3/8" Liquid, 15' L, 1/2" Insulation, 700 PSI, C12200 Copper, Mini Split, HVAC Line Set

Made in USA

Item#:
54761
Manufacturer Item:
61020150B3B6C
Manufacturer:
MUELLER INDUST-LINE SETS
You must be logged in to order this item. Log in here
3/8" Suction, 1/4" Liquid, 35' L, 1/2" Insulation, 700 PSI, C12200 Copper, Mini Split, HVAC Line Set

Made in USA

Item#:
54762
Manufacturer Item:
40620350B3B6C
Manufacturer:
MUELLER INDUST-LINE SETS
You must be logged in to order this item. Log in here
1/2" Suction, 1/4" Liquid, 35' L, 1/2" Insulation, 700 PSI, C12200 Copper, Mini Split, HVAC Line Set

Made in USA

Item#:
54763
Manufacturer Item:
40820350B3B6C
Manufacturer:
MUELLER INDUST-LINE SETS
You must be logged in to order this item. Log in here
5/8" Suction, 3/8" Liquid, 35' L, 1/2" Insulation, 700 PSI, C12200 Copper, Mini Split, HVAC Line Set

Made in USA

Item#:
54764
Manufacturer Item:
61020350B3B6C
Manufacturer:
MUELLER INDUST-LINE SETS
You must be logged in to order this item. Log in here
3/8" Suction, 1/4" Liquid, 50' L, 1/2" Insulation, 700 PSI, C12200 Copper, Mini Split, HVAC Line Set

Made in USA

Item#:
54765
Manufacturer Item:
40620500B3B6C
Manufacturer:
MUELLER INDUST-LINE SETS
You must be logged in to order this item. Log in here
|◀ ◀ 193 - 204 of 2750 ▶ ▶|
View: