Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
|◀ 205 - 216 of 1719 ▶|
View:
1" x 1", Sweat x Sweat, 24 VAC 60 Hz, 0.48 A, 1.44 W, 300 PSI, Forged Brass, 2-Way, Normally Closed, Zone Valve

Up to 93% less energy usage

Universal Installation Orientation

Usable on Condensing Chilled Water Installations

12 valves on one 40 Volt Amp transformer

Multi-Function LED

Quick Connect Wiring

Pushbutton actuator replacement

Easy wire quick connections Manual override button

Positional indicator

Item#:
65323
Manufacturer Item:
Z100C2-1
Manufacturer:
TACO REPCO SALES
You must be logged in to order this item. Log in here
Item#:
65322
Manufacturer Item:
Z075C2-2
Manufacturer:
TACO REPCO SALES
You must be logged in to order this item. Log in here
3/4" x 3/4", NPT x NPT, 100000 BTU/Hr, 50 Gallon, 120 VAC 60 Hz, 5 A, 83 GPH, Lead-Free, Commercial Natural Gas Water Heater

The Force 90+ is a light-duty, power direct vent, fully condensing commercial gas water heater with an internal helical heat exchanger

This helical heat exchanger helps Force 90+ achieve 96% thermal efficiency and deliver outstanding hot water output

Exclusive State designed touch display control system

Built-in diagnostics and operational information

Spiral heat exchanger keeps hot combustion gases in the tank longer to lengthen the heat transfer cycle

Positioned in the center of the tank for more even heat distribution

Spiral design reduces lime scale formation on the heat exchanger to maintain high efficiency operation over time

SIDE-MOUNTED HOT and COLD RECIRCULATING TAPS-Allows Force 90 to be installed as part of combination space heating/water heating applications

BLUE DIAMOND® GLASS COATING-Provides superior corrosion resistance compared to industry-standard glass lining

Co regard ANODE ROD-anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods

Energy Star® Rated

Lead-Free

Item#:
62294
Manufacturer Item:
100305437
Manufacturer:
STATE COMMERCIAL
You must be logged in to order this item. Log in here
115 VAC 60 Hz 1-Split Phase, 3.8 A, 1/6 HP, Open Drip-Proof, Hot Water Circulating Pump

Painted Red To Indicate Hot-Water Usage

40 Deg C Ambient

Reversible Rotation

Resilient Hub Rings

Special Balance For Quit Operation

Class B Insulation

1725 RPM

Automatic Reset Thermal Overload Protector

Sleeve Bearings Have All Angle Thrust System

Units Match OEM performance And Mechanical Features

Sleeve Bearings Unless Noted

Item#:
65358
Manufacturer Item:
3257
Manufacturer:
NIDEC MOTOR CORP.
You must be logged in to order this item. Log in here
115 VAC 60 Hz 1-Split Phase, 3.8 A, 1/6 HP, Open Drip-Proof, Hot Water Circulating Pump

Painted Red To Indicate Hot-Water Usage

40 Deg C Ambient

Reversible Rotation

Resilient Hub Rings

Special Balance For Quit Operation

Class B Insulation

1725 RPM

Automatic Reset Thermal Overload Protector

Sleeve Bearings Have All Angle Thrust System

Units Match OEM performance And Mechanical Features

Sleeve Bearings Unless Noted

Item#:
65354
Manufacturer Item:
3256
Manufacturer:
NIDEC MOTOR CORP.
You must be logged in to order this item. Log in here
3/4" or 1" or 1-1/4" or 1-1/2" Suction, 3/4" or 1" or 1-1/4" or 1-1/2" Discharge, Flanged x Flanged, 1/12 HP, 115 VAC 60 Hz 1-Phase 1.75 A, 1725 RPM, 125 PSI, Lead-Free, Centrifugal Brass Impeller, Bronze Casing, 3-Piece, In-Line, Horizontal, Circulating Booster Pump

B and G Motor is the Heart of the Booster

The Finest Circulator Motor Available

Sleeve Bearing, Oil Lubricated with Replaceable Resilient Motor Mounts

Noise Dampening Coupler

B and G Own Flexible Spring Design Adds to Quiet Operation

Long Bronze Sleeve Bearings Maintain Exact Shaft Alignment

Provides for Constant Circulation of Oil Over Bearing Surfaces

Precision Ground Pump Shaft is Oversized to Provide Large Bearing Surfaces

Hardened Integral Thrust Collar Minimizes End-Thrust to Ensure Long Seal and Bearing Life

The B and G Mechanical Seal is Designed to Withstand the Wide Range of Water Temperatures, Pressures, Additives and Dissolved Solids Common in Hydronic Systems

Centrifugal Impeller Prevents Accumulation of Air at Seal Faces to Assure Long Life

Close Impeller/Body Tolerances Minimize Water Slippage and Maximize Efficiency

Lead-Free

Item#:
65362
Manufacturer Item:
106197LF
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
1/2" x 3/4", MPT x MPT, 9" Diameter, Cast Iron, Tank Fitting
Item#:
65349
Manufacturer Item:
112008
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
1-1/2" x 1-1/2", FPT x FPT, 125 PSI, Cast Iron, Straight/Angle, Manual Open, Flow Control Valve with Removable Cap

Flo-Control Valves are Used for Preventing Gravity Flow in Forced Water Systems and to Permit Summer-Winter Operation of Indirect Water Heater

Removable Top Cap Allows Easy Cleaning and Service without Removing Pipe Connections

Manual Operating Position for Vertical Lift Disc to Permit Gravity Circulation

Asbestos-Free Packing and Gasket

Item#:
65348
Manufacturer Item:
107020
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
1-1/4" x 1-1/4", FPT x FPT, 125 PSI, Cast Iron, Straight/Angle, Manual Open, Flow Control Valve with Removable Cap

Flo-Control Valves are Used for Preventing Gravity Flow in Forced Water Systems and to Permit Summer-Winter Operation of Indirect Water Heater

Removable Top Cap Allows Easy Cleaning and Service without Removing Pipe Connections

Manual Operating Position for Vertical Lift Disc to Permit Gravity Circulation

Asbestos-Free Packing and Gasket

Item#:
65347
Manufacturer Item:
107019
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
1" x 1", FPT x FPT, 125 PSI, Cast Iron, Straight/Angle, Manual Open, Flow Control Valve with Removable Cap

Flo-Control Valves are Used for Preventing Gravity Flow in Forced Water Systems and to Permit Summer-Winter Operation of Indirect Water Heater

Removable Top Cap Allows Easy Cleaning and Service without Removing Pipe Connections

Manual Operating Position for Vertical Lift Disc to Permit Gravity Circulation

Asbestos-Free Packing and Gasket

Item#:
65346
Manufacturer Item:
107018
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
3/4" x 3/4", FPT x FPT, 125 PSI, Cast Iron, Straight/Angle, Manual Open, Flow Control Valve with Removable Cap

Flo-Control Valves are Used for Preventing Gravity Flow in Forced Water Systems and to Permit Summer-Winter Operation of Indirect Water Heater

Removable Top Cap Allows Easy Cleaning and Service without Removing Pipe Connections

Manual Operating Position for Vertical Lift Disc to Permit Gravity Circulation

Asbestos-Free Packing and Gasket

Item#:
65345
Manufacturer Item:
107034
Manufacturer:
B&G C/O HYDRONIC & STEAM
You must be logged in to order this item. Log in here
This item has been discontinued
Item#:
65343
Manufacturer Item:
80160198
Manufacturer:
US BOILER-PARTS
You must be logged in to order this item. Log in here
|◀ 205 - 216 of 1719 ▶|
View: