For steam and hot water boilers with cold water feed

Continuous maintenance of minimum safe water level, independent of electrical service

Proportional feed action

Quick hook-up fittings provided

Quick-change replaceable cartridge valve and strainer

Model 47 can be field upgraded with a No. 2 switch to add low water Cut Off function

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid

Lead-Free

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid

Ideal for increasing storage capacity when used along with water heaters and domestic hot water heating boilers

Thick foam insulation reduces standby heat loss and saves energy

Alkaline borosilicate composition is permanently fused to steel by firing at a temperature of 1600 Deg F and will provide years of corrosion protection and dependable use at water storage temperatures up to 180 Deg F

All tanks furnished with threaded openings for thermometer, relief valve, 2 Inch recirculation lines, tankstat and drain valve

Sized to fit space restrictive installations, all 80 and 120-gallon models fit through 30 Inch doorways

The Taco 007 is a cartridge style, Maintenance free, wet-rotor, in-line, single stage circulator pump

It is designed for quiet operation in Hydronic heating, Radiant heating, Hydro-Air fan coils, Indirect water heaters, Chilled fresh water and Domestic Water Recirculation systems

Quiet, Efficient Operation

Unique Replaceable Cartridge Design-Field Serviceable

Self-Lubricating

Unmatched Reliability-Maintenance Free

Lead-Free

Sandblaster is the Original Money Saving Self-Cleaning Water Heater

It Provides Outstanding Performance and Installation Flexibility for New Construction and Replacement Applications

Significantly Reduces Sediment Buildup Inside the Tank

Maintains Rated Thermal Efficiency, Reduces Water Heating Costs

Maximizes Tank Life

Automatic Motorized Flue Damper Helps Minimize Standby Heat Loss

Low-Profile Draft Diverter Helps for Installation in Tight Spaces

Hot and Cold Water Connections can be Made through Front, Top or Rear of Unit

Hydro Cannon Operates When Cold Water is Connected through Front

Eliminates Standing Pilot, Saves Energy

Anode Rods Provides Outstanding Protection Against Corrosion

Multiple Anode Rods with Stainless Steel Cores for Longer Life

Manual Reset Gas Shut-Off Device Prevents Excessive Water Temperature

Gas Pressure Regulator and Pilot Filter

Allows Easy Access to Tank Interior for Cleaning

Pipe Nipples and Caps to Plug Unused Water Connections

AHRI Certified

Lead-Free

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The bearings are lubricated by the pumped liquid