Internal relief valve available

Seven outlet pressure ranges

Automatic Vent Limiting Device Ball Check Permits Unobstructed Inhalation for Fast Regulator Diaphragm Response on Opening Cycle

Automatic Vent Limiting Device Ball Check Permits Unobstructed Inhalation for Fast Regulator Diaphragm Response on Opening Cycle

When Using the Vent Limiting Device, Regulator Must be Mounted in a Horizontal Upright Position

Automatic Vent Limiting Device Ball Check Permits Unobstructed Inhalation for Fast Regulator Diaphragm Response on Opening Cycle

When Using the Vent Limiting Device, Regulator Must be Mounted in a Horizontal Upright Position

Use in Intermittent Ignition Applications

Capable of Zone Control with Zone Valves

Circulator Zone Control with Zach and or Terminals on R8182D,E,H,J 8 Flame Failure During the Running Cycle Results in a 45 Second Attempt to Restart

If Unsuccessful, Safety Shut-Off Occurs, Requiring Manual Reset before Burner Can be Restarted

R8182D,E,F Mount Directly on Burner

R8182H,J Mount on 4 x 4 in Junction Box and Include 5 Foot (1.5 Meter) Armored Capillary with Remote Sensor

C554A Cadmium Sulfide Flame Detector and a 24 Volt AC Thermostat Required

Controls oil burner, oil valve and the ignition transformer in response to a call for heat

Solid state flame sensing circuit

LED on terminal strip indicates system lockout

Enclosed safety switch with external reset button

Manual trip lever opens safety switch for system maintenance

For mounting on a standard 4 in. x 4 in. junction box or direct mounting on burner housing

Provides overload protection for transformer

Convenient connections for thermostat and heating and cooling equipment wiring

Can be mounted in any indoor location without additional enclosure

Relay is easily replaced without disturbing wiring

Includes relay enclosure

Molded Terminal Numbers and Circuit Diagram on Top of Relay Provide Easy Identification for Wiring and Checking System

Untapped Coil Assures Cooler Operation

Laminated Magnet Construction for Higher Efficiency

Base Designed for Easy Replacement of Competitive Relay

Use to Troubleshoot System Operation

Platinum Positive Temperature Coefficient Sensor

Factory Calibrated

No Settings or Field Calibration Required

Solid State Elements Sense Enthalpy (Temperature and Humidity), Use Two Sensors for Differential Control, Maximizing Energy Savings

Use One Sensor in Outdoor Air for Single Sensor Control, Use Two Sensors, One in Return Air and One in Outdoor Air for Differential Control

Mount in any Position up to 200 Ft (61 M) Away from Economizer Logic Module