Microban® Antimicrobial Additive in the Drain Pan to Resist Mold and Mildew Growth

Aluminum Tubing, Hairpin, Distributor and Header Tube

Copper Refrigerant Connection for Easy Brazing to Both Liquid and Suction Line

Preformed Flange in Outlet for Quick and Easy Plenum Connection

One of the Lowest Water Retention Drain Pan in the Industry to Minimize Mold and Mildew Growth

Interlocking Door Assemblies and Snug Line Seal Grommet to Minimize Air Leakage

Foil-Face Insulation for Easy Cleaning

Tubing Located at Door Split for Easy Coil Service or Cleaning All Drain Pan are Compatible with UV Light

All Piston Coil are Compatible with R22 or R410A

Omniguard Total Corrosion Protection with Proven Tube and Fin Design

Factory-Installed TXV For Quick Installation In High Efficiency Application

Foil-face Insulation Simplified Cleaning While Preserving Energy Efficiency

A drain Pan With One of The Industry's Lowest Water Retention Rate Reduce The Chance of Standing Water, Odor and Allergen

Microban® Antimicrobial Additive in the Drain Pan to Resist Mold and Mildew Growth

Aluminum Tubing, Hairpin, Distributor and Header Tube

Copper Refrigerant Connection for Easy Brazing to Both Liquid and Suction Line

Preformed Flange in Outlet for Quick and Easy Plenum Connection

One of the Lowest Water Retention Drain Pan in the Industry to Minimize Mold and Mildew Growth

Interlocking Door Assemblies and Snug Line Seal Grommet to Minimize Air Leakage

Foil-Face Insulation for Easy Cleaning

Tubing Located at Door Split for Easy Coil Service or Cleaning All Drain Pan are Compatible with UV Light

All Piston Coil are Compatible with R22 or R410A

Omniguard Total Corrosion Protection with Proven Tube and Fin Design

Factory-Installed TXV For Quick Installation In High Efficiency Application

Foil-face Insulation Simplified Cleaning While Preserving Energy Efficiency

A drain Pan With One of The Industry's Lowest Water Retention Rate Reduce The Chance of Standing Water, Odor and Allergen

Microban® Antimicrobial Additive in the Drain Pan to Resist Mold and Mildew Growth

Aluminum Tubing, Hairpin, Distributor and Header Tube

Copper Refrigerant Connection for Easy Brazing to Both Liquid and Suction Line

Preformed Flange in Outlet for Quick and Easy Plenum Connection

One of the Lowest Water Retention Drain Pan in the Industry to Minimize Mold and Mildew Growth

Interlocking Door Assemblies and Snug Line Seal Grommet to Minimize Air Leakage

Foil-Face Insulation for Easy Cleaning

Tubing Located at Door Split for Easy Coil Service or Cleaning All Drain Pan are Compatible with UV Light

All Piston Coil are Compatible with R22 or R410A

Omniguard Total Corrosion Protection with Proven Tube and Fin Design

Factory-Installed TXV For Quick Installation In High Efficiency Application

Foil-face Insulation Simplified Cleaning While Preserving Energy Efficiency

A drain Pan With One of The Industry's Lowest Water Retention Rate Reduce The Chance of Standing Water, Odor and Allergen

High efficiency lanced fin design

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature engineered polymer

Copper refrigerant connections for easy brazing on both copper and aluminum slab model

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets: secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

High efficiency lanced fin design

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature engineered polymer

Copper refrigerant connections for easy brazing on both copper and aluminum slab model

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets: secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

High efficiency lanced fin design

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature engineered polymer

Copper refrigerant connections for easy brazing on both copper and aluminum slab model

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets: secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

High efficiency lanced fin design

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature engineered polymer

Copper refrigerant connections for easy brazing on both copper and aluminum slab model

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets: secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

High efficiency lanced fin design

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature engineered polymer

Copper refrigerant connections for easy brazing on both copper and aluminum slab model

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets: secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

High efficiency lanced fin design

R-22, R-410A, AC and Heat Pump compatible

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature (450 Deg F) engineered polymer

Dual 3/4 Inch FPT condensate drains on front-left and front-right side of drain pans

Patented HydroTEC low water retention drain pan

Copper refrigerant connections for easy brazing on both copper and aluminum slab models

Intertek lab tested 1% or less cabinet air leakage for better efficiency

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Short cabinet with easy access

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets - secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Expansion valve with improved temperature sensing - Mounted inside cabinet to prevent external sweating and Bulb clamped standard factory installed

All multi-position coils are upflow, downflow and left or right airflow capable

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

All multi-position coils are field convertible from horizontal right-to-left airflow and horizontal left-to-right airflow

All A-Coils are upflow or downflow capable

High efficiency lanced fin design

R-22, R-410A, AC and Heat Pump compatible

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature (450 Deg F) engineered polymer

Dual 3/4 Inch FPT condensate drains on front-left and front-right side of drain pans

Patented HydroTEC low water retention drain pan

Copper refrigerant connections for easy brazing on both copper and aluminum slab models

Intertek lab tested 1% or less cabinet air leakage for better efficiency

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Short cabinet with easy access

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets - secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Expansion valve with improved temperature sensing - Mounted inside cabinet to prevent external sweating and Bulb clamped standard factory installed

All multi-position coils are upflow, downflow and left or right airflow capable

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

All multi-position coils are field convertible from horizontal right-to-left airflow and horizontal left-to-right airflow

All A-Coils are upflow or downflow capable

High efficiency lanced fin design

R-22, R-410A, AC and Heat Pump compatible

All coils have durable packaging with bar coded labels on the box

Threaded expansion valves available factory installed or as a field installed kit

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs then charged with dry air

Piston options include externally accessible body for easy piston change out and/or TXV installation

Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan

UV resistant drain pans are molded of high temperature (450 Deg F) engineered polymer

Dual 3/4 Inch FPT condensate drains on front-left and front-right side of drain pans

Patented HydroTEC low water retention drain pan

Copper refrigerant connections for easy brazing on both copper and aluminum slab models

Intertek lab tested 1% or less cabinet air leakage for better efficiency

Cased coil cabinets are fully lined with 5/8 Inch foil faced insulation

Short cabinet with easy access

Non-captive refrigerant lines with long stubs make for easy installation

Enhanced refrigerant pipe grommets - secure, tight and easy to install

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Expansion valve with improved temperature sensing - Mounted inside cabinet to prevent external sweating and Bulb clamped standard factory installed

All multi-position coils are upflow, downflow and left or right airflow capable

Cabinet insulation hold down tabs for easy drain pan removal

Interlocking doors reduce air leakage and allow for easy access

Foam drain seal for reduced air leakage

All multi-position coils are field convertible from horizontal right-to-left airflow and horizontal left-to-right airflow

All A-Coils are upflow or downflow capable