Creates Precise and Fast Standard 45 Degree Flares in Copper and Aluminum Line Set for Mini-Split HVAC System

Tip Guides the Flaring Bit into the Tube and Forms a Standard 45 Degree Flares

Stopper Ensures a Consistent Length of the Flare Surface

Standard 1/4 Inch Hex Shank Fit's Directly into Most Power Tools without an Adapter

Lead-Free

Kit contents include: Desolv Cleaning Solution (1 gal.), C-Band Frame Assembly, Single Use Funnel Bags (2), Drain Pail (5 gal), Installation Instructions

Use to deep clean the indoor evaporator of mini-split A/C units that are located in areas where wall and floor protection are necessary. Kit is reusable. Desolv Solution and Funnel Bags are also sold separately.

Made in USA

Safer to use because of its low toxicity- application and cleanup are safe, simple, and easy

Concentrated

May be left in sprayer - will not corrode parts

Will not harm aluminum, copper or steel

Acts as a corrosion inhibitor with no heat transfer loss

Completely biodegradable formula presents very little hazard to people, animals, aquatic life, and vegetation. Unlike strong acid and alkaline coil cleaners, this heavy duty product will not chemically attack (corrode) coils, surrounding metal, other non-electrical HVAC equipment components or application equipment

Made in USA

Safer to use because of its low toxicity- application and cleanup are safe, simple, and easy

Concentrated

May be left in sprayer - will not corrode parts

Will not harm aluminum, copper or steel and Acts as a corrosion inhibitor with no heat transfer loss

Kit contents include: Desolv Cleaning Solution (1 gal.), C-Band Frame Assembly, Single Use Funnel Bags (2), Drain Pail (5 gal), Installation Instructions

Made in USA

Light-weight at 1.15 lbs

Easy one-touch open/close

Advanced corrosion resistance

Safety hook

Strong handles

Stays in adjustment

Cuts cleanly

Equipped with quick opening mechanism and safety stopper

Stopper Ensure a Consistent Length of the Flare/Swage Surface

Tip Guide the Bit into the Tube and Form a Standard 45 Degree Flare or Consistent Swage

Standard 1/4 Inch Hex Shank Fit Directly into Most Power Tool without Adapter

Comes in a Durable See-Through Case for Better Tool Visibility

Lead-Free

Sensor connects to indoor units

Onboard led indicator can be mounted to side of unit

Designed for mini-split systems

Soft gasket material on support Foot and support arms protect wall surfaces and evaporator coil encasement finishes from scratches

Flip-up gates at the end of both support arms helps to prevent slip off and damage to the evaporator or flooring below

Horizontal leveling of support arms is accomplished by sliding an included cotter pin into four adjustment hole selections

Pays for itself in labor savings after just one installation

Four-color, fully-illustrated glossy packaging box can easily be displayed on wholesaler end caps, shelves or counters

rounded corners prevent worker injury from sharp edge

The Mighty Bracket accommodates most mini-split brands and evaporator weights up to 100-pound

Strong secure support

Includes level for convenience

Sliding cross bar gives this bracket an exceptional equipment width range

This filter catches dead mites and their droppings, pollen and other allergens on the filter filament, then decomposes them with artificial enzymes

Allows for remote temperature monitoring within an area for the indoor unit

Wires back to the indoor unit at CN20 to replace the return air temperature sensor