Prevents ice from building up on the outdoor unit base when operating in heating mode for an extended period of time in a very low temperature, high humidity condition

Controlled by outdoor unit

Works during defrost operation and energizes when outdoor temperature drops below 36 Deg F

PAC-646BH-E connect to CN714 on MXZ-2C20NA2

Allows for a third party building management system to control a Mitsubishi Electric Cooling and Heating CITY MULTI®, M-Series or P-Series indoor unit

One MelcoBEMS MINI (A1M) per indoor unit

Indoor Unit Connection: CN105 - IT Terminal

12 Volt DC power from indoor unit CN105 Connector

Compatible with MAC-333IF connector CN505 IT

requires additional 12VDC power supply

Prevents ice from building up on the outdoor unit base when operating in heating mode for an extended period of time in a very low temperature, high humidity condition

Controlled by outdoor unit

Works during defrost operation and energizes when outdoor temperature drops below 36 Deg F

Prevents ice from building up on the outdoor unit base when operating in heating mode for an extended period of time in a very low temperature, high humidity condition

Controlled by outdoor unit

Works during defrost operation and energizes when outdoor temperature drops below 36 Deg F

PAC-SJ20BH-E connects SS on Control board of MXZ-8C48NA, 8C60NA, PUZ-A36,42NKA7, PUZ-HA42NKA, PUMY-P36,48,60NKMU2

Allows for a separate power supply to MVZ and PVA indoor units when connected with select outdoor units

Allows for additional indoor unit configurations when installed on units connected with select outdoor units

Allows for electric heat operation when power to outdoor unit is interrupted or in Error

Fits between 16 Inch joists

Stylish, square design panel

Built in condensate lift mechanism (19.6 Inch)

Serviceable from the bottom (electrical and flare connection)

Adjustable fan speeds and vane directions

Industry leading slim body realized a simple design with linear beauty

AHRI Certified

Energy Star® Rated

Patented a single burner combustion system including a one-piece burner assembly

115 Volt Open Fan Motor with Internal Overload Protection

Integrated circuit board with diagnostic indicator lights

Multi-try direct ignition with timed lockout

Fan relay (included on the circuit board)

Single-stage natural gas valve

Vibration/noise isolated fan motor

Sealed control compartment houses all electrical components

48 frame, ball bearing, PSC venter motor

4-point Suspension

External terminal strip for 24 volt wiring

Sealed junction box for supply wiring

External Gas Connection

Fully gasketed door panel with safety door switch

Full Fan Guard Engineered for Safety

Improved Cabinet Design with Less Visible Hardware