Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
Home  >  Hydronics  >  Controls  >  Air Elimination and Vents  > 551008A Discal Air Separator

551008A Discal Air Separator 1 1/2" FNPT

Item #: 95292 
Manufacturer Item: 551008A
Manufacturer: CALEFFI NORTH AMERICA,INC
1-1/2" x 1-1/2", FPT x FPT, 22 GPM, 150 PSI, Brass, Micro-Bubble, Air Separator
95292

The DISCALĀ® air separator is used to continuously remove the air contained in hydronic circuits of heating and cooling systems

The air discharge capacity is very high

They automatically remove all the air present in the system down to micro-bubble level with low head loss due to the special internal shape of the separator body

Flow direction of the DISCAL air separator is bidirectional

flow in either direction is permitted

The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage

Micro-bubbles, fusing with each other, increase in volume (get larger) until they become large enough to rise to the top where they are automatically released

Air Elimination and Vents

Pressure Rating
150 PSI
Application
Heating and Cooling System
Type
Micro-Bubble
Body Material
Brass
Temperature Rating
32 to 250 Deg F
End Connection
Female Threaded x Female Threaded
End to End Distance
4-1/8 Inch
Flow Rate
22 GPM
Applicable Standard
ICIM ISO 9001/2008, FM 21654, ANAB